[W126 Coupe] wired

[Jay Hirsch]

Dick,

Will do so tomorrow morning
THANK YOU
keep cruisin
Jay
On Apr 2, 2011, at 5:52 PM, Dick Spellman wrote:


> Jay,

> Use a flat blade screw driver to separate the halves at the face  

> where the plastic fastner goes through the grommeted plastic hole  

> then lift off the coil cap.  The fastener presses back in place  

> once the cap is returned and seated correctly atop the coil.

>

> -\Dick

>

> On Sat, Apr 2, 2011 at 3:20 PM, Jay Hirsch <J.Hirsch at mac.com> wrote:

>

> Installed new Beru wires yesterday.

> Question: what  is the secret to taking  off the " triangular cap"  

> where the ignition wire goes  into the coil?    That is  the  

> triangular plastic cap  under the A/C hose.

>

>

>

> keep cruisin

> Jay H

>  I marked all the wires before I started as to where they were on  

> the cap and to which plug they went to just in case I pulled two  

> wires out of the  dist. cap at the same time

>

>

>

>

>

> DSC_0034

>

>

>

>

> 035   triangular cap under a/c hose where igition coil wire goes  

> into.  how do you unplug the wire

>

>

>

>

> 0040   plastic cap under a/c hose, how do you remove this to unplug  

> ignition coil wire?

>

>

>

>

> DSC_0042

>

>

>

>

> 037    plastic cap under a/c hose is where igniton wire goes.  how  

> do you take the cap off

>

>

>

>

> The MB Coupes Website!

> W126 SEC Mailing List

> Postings remain property of MB Coupes, L.L.C.

>

> The MB Coupes Website!

> W126 SEC Mailing List

> Postings remain property of MB Coupes, L.L.C.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.pairlist.net/pipermail/mbcoupes/attachments/20110403/2e26bdd0/attachment.htm>