[W126 Coupe] wired

[Dick Spellman]

Jay,
Use a flat blade screw driver to separate the halves at the face where the
plastic fastner goes through the grommeted plastic hole then lift off the
coil cap.  The fastener presses back in place once the cap is returned and
seated correctly atop the coil.

-\Dick

On Sat, Apr 2, 2011 at 3:20 PM, Jay Hirsch <J.Hirsch at mac.com> wrote:


>

>  Installed new Beru wires yesterday.

>> Question: what  is the secret to taking  off the " triangular cap" where

>> the ignition wire goes  into the coil?    That is  the triangular plastic

>> cap  under the A/C hose.

>>

>>

>>

>> keep cruisin

>> Jay H

>>  I marked all the wires before I started as to where they were on the cap

>> and to which plug they went to just in case I pulled two wires out of the

>>  dist. cap at the same time

>>

>>

>>

>>

>

>> DSC_0034

>>

>>

>>

>

>> 035   triangular cap under a/c hose where igition coil wire goes into.

>>  how do you unplug the wire

>>

>>

>>

>

>> 0040   plastic cap under a/c hose, how do you remove this to unplug

>> ignition coil wire?

>>

>>

>>

>

>> DSC_0042

>>

>>

>>

>

>> 037    plastic cap under a/c hose is where igniton wire goes.  how do you

>> take the cap off

>>

>>

>>

>

> The MB Coupes Website!

> W126 SEC Mailing List

> Postings remain property of MB Coupes, L.L.C.

>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.pairlist.net/pipermail/mbcoupes/attachments/20110402/b8b283dc/attachment.htm>