[LargeFormat] Power supply for a Durst 450 CLS head.
Peter Barry
peter_g_barry at hotmail.com
Fri Apr 8 14:16:47 EDT 2005
Thank you Gorges,
Fortunately the power supply is the simpler unstabilised version, and I
think the problem may lie with the relay which I will upgrade to a more
robust model. If all else fails however, I will go with your suggestion of
using a simpler 24 V supply!
...Pete
>From: Georges Giralt <georges.giralt at free.fr>
>Reply-To: f32 Large Format Photography Mail List <largeformat at f32.net>
>To: f32 Large Format Photography Mail List <largeformat at f32.net>
>Subject: Re: [LargeFormat] Power supply for a Durst 450 CLS head.
>Date: Fri, 08 Apr 2005 06:00:04 +0200
>
>Peter Barry a écrit :
>>Hi to all,
>>
>>The transformer which powers the 450 CLS head on my ageing Durst L1200
>>enlarger has just had the last rites pronounced on it. Replacement
>>transformer units seem to be a little rare on the second hand market, so
>>does anyone know how to rig up an alternative 24 V 450 W power supply?
>>
>>...Peter Barry
>Hi Peter !
>Is it the plain transformer supply or the Electronic stabilized power
>supply ?
>If it is the first case, you will be able to change parts as they are
>pretty simple and common.
>If it is the electronic stuff, and if the problem is not obvious, you may
>be able to request a schematics from Durst in Italy (try to fill the
>request form on their web site).
>If it has smoked beyond repair (it is now obsolete technology so difficult
>to repair anyway) you may replace all the stuff inside except the proxy for
>the head fan by a simple 24 V output transformer like the one used in
>halogen lighting. Choose a toroidal one as they are better at hum and
>efficiency and go to print. You will have to re wire the head connector if
>you suppress all the electronic, but I've got the echematics somewhere, if
>you need.
>Hope this helps
>P.S. keep in mind that the head fan is high voltage, mine is 220 V (a
>European version, so you've to feed this voltage to the head) and that
>you've to check the solderings in the head and in the conector. Bad solders
>caused my power supply's fuse to blow.
>--
>Ce message est constitué d'au moins 50 % d'électrons recyclés.
>Aucun électron n'a été blessé ou forcé d'aucune manière
>pendant l'écriture de ce message. S'il vous plaît aidez nous
>à conserver nos ressources, recyclez vos électrons !
>_______________________________________________
>LargeFormat mailing list
>LargeFormat at f32.net
>http://www.pairlist.net/mailman/listinfo/largeformat
More information about the LargeFormat
mailing list