[W126 Coupe] Reverse noise

[Dick Spellman]

Mel,

I' d also inspect your flex disks at either end of the drive shaft for 
cracks around the bolts.  Replace both if one is cracked and 
inspect/replace the center support  bearing at the same time if you had 
noted any humming or harmonics when at speed.  Certainly the 
transmission fluid, filter and torque converter should be changed at 30k 
mile intervals as well.

-\Dick

On 10/17/2011 2:16 PM, Mel Spillman wrote:

> I have a 84 SEC and when I engage reverse nothing happens until about 

> 2 sec. later then you hear a clunking noise and it engages. Anyone 

> know what causes this? Thanks, Mel

>

>

> The MB Coupes Website!

> W126 SEC Mailing List

> Postings remain property of MB Coupes, L.L.C.



-- 
The information contained in this e-mail and the attachments, if any, is 
legally privileged and CONFIDENTIAL.  It is intended solely for the use 
of the individual or entity to whom it is addressed and others 
authorized to receive it.  If you are not the intended recipient you are 
hereby notified that any disclosure, copying, distribution, or taking 
action in reliance of the contents of this information is strictly 
prohibited and may be unlawful
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.pairlist.net/pipermail/mbcoupes/attachments/20111017/2b0fc946/attachment.htm>