[W126 Coupe] Power window motors

[Mike Beyersdoerfer]

Hi Yousef,

I have been selling Second Skin Sound Deadener for 6 years.  100%  
Butyl with amazing adhesive.

You don't want any with Asphalt!!  It will release at 140 degrees!!   
If it comes in a roll don't by it .  Rolled product is designed for  
roofing

Sorry I don't think Second Skin is distributed in Dubai.

MIke Beyersdoerfer
87 560SEC
On Oct 2, 2011, at 7:08 AM, Axel Wulff wrote:


>  Hey Yousef,

>

> Nice project.

>

> The vibration dampener isn't rocket science. After all, it's just  

> butyl on thick aluminium foil.

>

> Just make sure it is butyl and not asphalt.

>

> Asphalt shingles as vibration dampeners can be used for a lot of  

> applications, and they are cheap. However, they are not suitable for  

> use in a car, especially not in Dubai, as the asphalt has a lower  

> melting point than butyl and can end up as ballast at the bottom of  

> your doors.

>

> Regards,

> Axel J. Wulff

> 610-731-5453 Cellular

> 610-572-4611 Home

>

>

> Date: Sun, 2 Oct 2011 14:11:11 +0400

> From: usef4188 at gmail.com

> To: mbcoupes at mbcoupes.com

> Subject: Re: [W126 Coupe] Power window motors

>

> Dear Axel

>

> Great thanks on the advice ill definitely go through it since am  

> already there and do not wish to do it again ;).. ive seen a few  

> posts regarding the attachment points from Junno .. am just worried  

> if am gonna be able to put things back the way it was correctly.

>

> Regarding sound deadening materials.. the the main problem i face in  

> this part of the world is finding materials.. for instance Dynamat,  

> Raamat , etc.. is not available here (Dubai) and shipping would  

> double my costs.. i only found AODEA deadening kits .. some Japanese  

> brand .. i dunno if its good or bad ..each kit costs  approx 75 USD  

> and i get the materials shown in the image.. i just hope it works  

> well.. else it would be really disappointing after all the work..

>

> haven't had difficulties with the dash ive reached to the part where  

> is need to disconnect the AC vent cables.. but a quick look showed  

> that it wont be tough .. except for the center sliding cable.. but  

> that isnt working correctly in the first place so lets see how that  

> goes.. having that mentioned .. there is clear evidence that someone  

> has removed the dash before.. broken clips and some double sided  

> tape etc..

>

> Interesting things i found: 1) 100 Yen coin (2) lots of dust and  

> dirt from Japan.. (3) a spider web some where near the steering  

> column.. no signs of life yet..

>

> ill do a write up once am done and have all the photos compiled..  

> for the sake of sharing :P

>

> Yousef

>

>

>

> On Sun, Oct 2, 2011 at 5:28 AM, Axel Wulff <axelwulff at hotmail.com>  

> wrote:

> Yousef,

>

> I did some sound treatment on my doors a few years ago and if I  

> remember correctly the material on the outer door skin you describe  

> is the MB sound deadening. Assuming you're using a good CLD  

> (contraint layer dampening), such as Dynamat, Raamat, Damplifier,  

> etc., the new treatment will be more effective.

>

> You'll have to completely remove the window mechanism to apply the  

> sound deadener so use the opportunity to completely clean everything  

> and apply fresh grease to the cogs and rails. That should make  

> things move a smoother and faster.

>

> While the stuff is out of the door, it's a good opportunity to  

> inspect the attachment point and renew if necessary.

>

> Good luck on your project.

>

> Regards,

> Axel J. Wulff

> 610-731-5453 Cellular

> 610-572-4611 Home

>

>

> > From: usef4188 at gmail.com

> > Date: Sat, 1 Oct 2011 23:55:26 +0400

> > To: mbcoupes at mbcoupes.com

> > Subject: [W126 Coupe] Power window motors

>

> >

> > Hey all

> >

> > I have been removing the interior + dashboard in order to do sound  

> deadening, lay cables for audio system and replace vacuum pods ..

> >

> > Anyways I've removed the door panels and I have a few questions..

> >

> > 1) my power windows are kinda slow goin up and down.. Could this  

> be from old motors ? Does anyone know the specs on these motors and  

> did anyone try replace them with better motors of some sort?

> >

> > 2) between the glass sheet and the outter panel there is a sheet  

> of some material.. What is it for and can I loose it since am gonna  

> use the sound deadening material?

> >

> > Thanks

> > Yousef

> >

> > Sent from my iPad

> > The MB Coupes Website!

> > W126 SEC Mailing List

> > Postings remain property of MB Coupes, L.L.C.

>

> The MB Coupes Website!

> W126 SEC Mailing List

> Postings remain property of MB Coupes, L.L.C.

>

>

>

> -- 

> ---------------------------

> Yousef Nazzal

> ---------------------------

>

> The MB Coupes Website! W126 SEC Mailing List Postings remain  

> property of MB Coupes, L.L.C.

> The MB Coupes Website!

> W126 SEC Mailing List

> Postings remain property of MB Coupes, L.L.C.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.pairlist.net/pipermail/mbcoupes/attachments/20111002/75cf15f5/attachment.htm>