[W126 Coupe] ASR and Emissions Testing
Jonathan Hodgman
jhodgman at gmail.com
Fri Dec 2 16:14:58 EST 2011
Rich,
You can also pull the cover on the ABS/ASR module and pop out the
relays, takes about 3 min to do..:)
Jonathan
On 12/2/2011 3:39 PM, Richard K. Hallberg wrote:
> In Atlanta, GA the emissions test stations perform a programmed test
> with the rear wheels sitting on rollers (like a dyno). My 91 560sec
> nearly jumped off the rollers with the ASR defeat switch on or off.
> By pure luck, I found in the 126 Chassis & Body Manual a note on page
> 1223 in section 42-0810 that mentions that "The connector from the
> ABS/ASR control module (N30/1) MUST BE DISCONNECTED before driving on
> to the performance test bench or speedometer tester". I don't recall
> any mention of this on mbcoupes or BenzWorld in the three years I have
> been a member. Any thoughts??
>
> I will try this trick at the emission test station and report back -
> hopefully works.
>
> Richard Hallberg
> The MB Coupes Website!
> W126 SEC Mailing List
> Postings remain property of MB Coupes, L.L.C.
>
More information about the MBCOUPES
mailing list