[W126 Coupe] stalling and rough idle update

[Camran Nassiri]

Hi Tom- can you find out the name of the "German made fuel injector cleaner"?  I would love to use some in mine since it also runs a little rough.

Thanks,
Camran
90 560SEC, 91 420SEL, 80 240D


 


From: toelsner at comcast.net
To: mbcoupes at mbcoupes.com
Date: Mon, 11 Jan 2010 17:24:34 -0800
Subject: [W126 Coupe] stalling and rough idle update




First of all, I want to thank everybody for all their suggestions for what the problem(s) might be. A special thanks to Dick Spellman for helping to identify a good indy shop here in Silicon Valley. I brought the car in to the shop and the guy immediately had some ideas where to look. It turns out I had a couple of minor problems. The fuel pump relay had a solder joint that looked like it had an intermittent connection and there were 2 other suspects that he soldered. Also, the fuel distributor needed to be flushed. He also adjusted the Lamda and cleaned the plate. Lastly, he put in some German made fuel injector cleaner as it was still slightly rough on startup. Total labor was 1 hour and total bill was $131. There is a tiny bit of roughness which he says is because the motor mounts are flat and some of the engine vibration is being transmitted through the chassis. But with 205k on it, I think that is pretty minor. Again, thanks all!
 
Tom Oelsner 		 	   		  
_________________________________________________________________
Your E-mail and More On-the-Go. Get Windows Live Hotmail Free.
http://clk.atdmt.com/GBL/go/196390709/direct/01/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.pairlist.net/pipermail/mbcoupes/attachments/20100112/273f0dc4/attachment.html>