[W126 Coupe] Rear spheres

[Markus Meyer]

You don't need to drain the reservoir.  With the pump not running, the fluid
in the reservoir won't drain.  However, the fluid from the pump to the
spheres will need to be drained.  What I do is jack up the car the night
before and drain via the bleed screw on the SLS valve attached to the rear
sway bar.

Markus

On Sat, Feb 13, 2010 at 3:55 AM, Dan Gardner <cruftsk9 at tpg.com.au> wrote:


> Hi Folks

>

>   I am in the process of fitting the above,should I syphon the fluid

> resovoir or just clamp off the rubber hoses connected to the spheres to

> prevent excess fluid loss.I understand they are pressurised so unlike brake

> hoses the clamping may not work.

>

>                                                                       Kind

> Regards Dan   1986 560SEC  Euro  (220kw)

> The MB Coupes Website!

> W126 SEC Mailing List

> Postings remain property of MB Coupes, L.L.C.

>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.pairlist.net/pipermail/mbcoupes/attachments/20100213/75df59aa/attachment.html>