[W126 Coupe] FW: Anti Freeze Change Dilemma

Markus Meyer markusfmeyer at hotmail.com
Fri Oct 23 09:15:31 EDT 2009



A couple of helpful threads about draining the coolant/flushing with citric acid, etc:

http://www.benzworld.org/forums/w126-s-se-sec-sel-sd/1474108-antifreeze-drain-fill.html

http://www.benzworld.org/forums/w126-s-se-sec-sel-sd/1446652-c126-w126-water-pump-r-r-8.html

Markus Meyer
484-919-9762
www.meyerprobateproperties.com





From: diefenbach at kingcon.com
To: mbcoupes at mbcoupes.com
Date: Fri, 23 Oct 2009 08:39:50 -0400
Subject: Re: [W126 Coupe] Anti Freeze Change Dilemma




Mike - Markus and Jonathan have the right idea about leaving the block drains alone and flush with water. Make sure you leave your heat temps. on high to circulate all the old stuff out of the car.

Dick
Danville, VT


Mike,

I wouldn't bother, honestly. I know someone who did this and it turned into quite a nightmare. I'd simply drain the radiator, refill with water, run the car for a bit, then drain it again and refill with 50/50. If you really want to go nuts, you can do the acid flush, but I've also heard cautions on doing that as it could loosen things and clog the system.

Markus Meyer
484-919-9762
www.meyerprobateproperties.com





From: mdeholl at ptd.net
To: mbcoupes at mbcoupes.com
Date: Thu, 22 Oct 2009 20:48:33 -0400
Subject: [W126 Coupe] Anti Freeze Change Dilemma




I suspect its been 4 or 5 years or longer since the antifreeze has been change on my 1991 SEC. I have the car up on ramps, new MB antifreeze ready to add. My dilemma is I can't get the engine block drain plugs loose to properly drain all the fluid. If I'm reading the Service Manual correctly the location of the plugs correspond to a 6mm allen socket plug. I have the plugs drenched with liquid wrench. Any suggestion how to get these buggers out?
Thanks Mike


Windows 7: It works the way you want. Learn more.



The MB Coupes Website!
W126 SEC Mailing List
Postings remain property of MB Coupes, L.L.C.



Windows 7: It works the way you want. Learn more.
_________________________________________________________________
Windows 7: I wanted more reliable, now it's more reliable. Wow!
http://microsoft.com/windows/windows-7/default-ga.aspx?h=myidea?ocid=PID24727::T:WLMTAGL:ON:WL:en-US:WWL_WIN_myidea:102009
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.pairlist.net/pipermail/mbcoupes/attachments/20091023/1c9a3e0b/attachment.htm>


More information about the MBCOUPES mailing list