[W126 Coupe] Vanity Light

[Josh Allen]

Simon,
If you look at the forward side of the clip, you should see the faint 
outline of the cover over that screw.  It requires popping the cover 
open with a thin screwdriver or the tip of a sharp knife.
Then the screw is easily accessed through the hole, as long as the visor 
isn't clipped into it.

Be careful with the small plastic cover though, as it's plastic and 
prone to have gotten brittle with the years.

-Josh

simon wrote:

> I recently had my headliner reupholstered and one of the many issues 

> my car came back with was that the passenger side vanity light did not 

> come on. I have narrowed the problem down to the connection where the 

> visor clips in. There is some play in this clip where it feels like it 

> hasn't been screwed in to the roof right. How do you tighten it, there 

> seems to be a screw in there but how do I get to it ?

> ------------------------------------------------------------------------

>

> The MB Coupes Website!

> W126 SEC Mailing List

> Postings remain property of MB Coupes, L.L.C.