[W126 Coupe] MBCOUPES Digest, Vol 60, Issue 33

[Mike R.]

I found a ball-end 3/8" drive Allen wrench that does the trick. If I every
pull enough stuff off the front of the engine to get that ^&*() Allen out of
there, it will get a 17mm bolt too.
 
Later,
Mike R.
 
AC Allen wrench1.JPG
From: mbcoupes-bounces at mbcoupes.com [mailto:mbcoupes-bounces at mbcoupes.com]
On Behalf Of Ernest Stephens
Sent: Thursday, July 30, 2009 10:44 AM
To: Mercedes Coupes Mailing Lists
Subject: Re: [W126 Coupe] MBCOUPES Digest, Vol 60, Issue 33
 
I don't know it for a fact but I believe that the 87 560 SEC did not come
with back seat headrests. I have had my 87 560 SEC since 93 and have noticed
most if not all 560 SEC's, assuming that all of those w/o the back seat
headrests to be 87's.
steve
 
PS: Not a big issue but does anyone know of a specialty tool to tighten the
AC belt; I modified a 10 mm Allen wrench to squeeze in-between the pulley
and the adjustment arm bolt to tighten the belt but there has got to be a
better way of doing this.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.pairlist.net/pipermail/mbcoupes/attachments/20090730/9068b598/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 31908 bytes
Desc: not available
Url : <http://www.pairlist.net/pipermail/mbcoupes/attachments/20090730/9068b598/attachment-0001.jpe>