[W126 Coupe] Seat change...

[Jon Pridham]

Hi Everybody again!
 
Ok - here's my next challenge and question!
 
I'm in the process of changing my interior from the early style to late style - which also has the orthopaedic option. 
I've changed the vacuum pump, plumbed in all the air lines to the front seats, and i''ve fitted the drivers seat which is fully operational - Hurrah!!
 
Now comes the next challenge!!
 
For some reason the replacement passenger seat is a non-memory seat, unlike my current seat - hence the multi-plug is very different
 
I presently have both seats upside down sitting on the kitchen table (much to my wife's bemusement!!) ready to operate. The way i'm looking at it is that i have to change the bases over including the motors from the back rest & head rest as well.
 
My question/s is this....
 

What is my best option to get the replacement seat with the memory seat opton fitted? - is it best to remove the whole lower base - or transfer the electrics over instead?  
If the best option is to remove the lower base of the seat - which is the best way to do it?
 
 
Thanks Jon 1982 380SEC1987 560SEC
_________________________________________________________________
The next generation of Windows Live is here
http://www.windowslive.co.uk/get-live
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.pairlist.net/pipermail/mbcoupes/attachments/20080322/7416c417/attachment.htm>