[W126 Coupe] MBCOUPES Digest, Vol 48, Issue 30

Andrew Sporner asporner at googlemail.com
Sun Aug 24 14:02:20 EDT 2008


Hi Dr. H

Well I had one of your symtoms and it was a gunked up fuel distributor.
(it was running too fat on one of the cylinders).

However I would venture to say it sounds electrical, where something
is interrering with control computer.

Did you check the condition of the fuses? (see older post) Could be
that something is pulling enough current in certain cases to cause the
motor control computer to become interrupted.

Regards



Andy


On Sun, Aug 24, 2008 at 7:34 PM, <Drhpat at aol.com> wrote:


> Good Morning Guys,

>

> What would cause an 87' 560 SEL to cut out when idling in DRIVE, then when

> going down highway and roll down windows cut down on speed by 5-10 mph? Also

> when I adjust a seat.

>

> Thanks,

> Dr H

> 91 560 SEC

> 87 560 SEL

>

> In a message dated 8/24/2008 11:22:31 A.M. Central Daylight Time,

> mbcoupes-request at mbcoupes.com writes:

>

> Send MBCOUPES mailing list submissions to

> mbcoupes at mbcoupes.com

>

> To subscribe or unsubscribe via the World Wide Web, visit

> http://www.pairlist.net/mailman/listinfo/mbcoupes

> or, via email, send a message with subject or body 'help' to

> mbcoupes-request at mbcoupes.com

>

> You can reach the person managing the list at

> mbcoupes-owner at mbcoupes.com

>

> When replying, please edit your Subject line so it is more specific

> than "Re: Contents of MBCOUPES digest..."

>

>

> Today's Topics:

>

> 1. Help me be removed from mailing list please (ANDREW NOLAN)

> 2. Re: Help me be removed from mailing list please (Dan Landiss)

> 3. Re: Electrical / start problem (Dick Spellman)

> 4. Re: Electrical / start problem (Mister McGoo)

> 5. Re: Electrical / start problem (Shin Takei)

> 6. Re: Off Topic (ish) - Electric Rear Blind... (Axel Wulff)

> 7. Gear Shift Lever Removal (Camran Nassiri)

> 8. Re: Help me be removed from mailing list please (Gary)

> 9. Re: how to take radio out ? (Gary)

> 10. Re: Electrical / start problem (Shin Takei)

> 11. Re: Off Topic (ish) - Electric Rear Blind... (Jon Pridham)

>

>

> ----------------------------------------------------------------------

>

> Message: 1

> Date: Sat, 23 Aug 2008 11:11:07 -0700 (PDT)

> From: ANDREW NOLAN <anolan68 at yahoo.com>

> Subject: [W126 Coupe] Help me be removed from mailing list please

> To: Mercedes Coupes Mailing Lists <mbcoupes at mbcoupes.com>

> Message-ID: <224743.86195.qm at web58315.mail.re3.yahoo.com>

> Content-Type: text/plain; charset="iso-8859-1"

>

> Hi

> Can I get help from anyone to remove me from this mailing list?? I am in

> poor health and have no time for this anymore.? Thank you.?

> anolan68 at yahoo.com

>

>

>

> -------------- next part --------------

> An HTML attachment was scrubbed...

> URL: <

> http://www.pairlist.net/pipermail/mbcoupes/attachments/20080823/88dd23fb/attachment.htm

> >

>

> ------------------------------

>

> Message: 2

> Date: Sat, 23 Aug 2008 15:02:40 -0500

> From: Dan Landiss <dan at landiss.com>

> Subject: Re: [W126 Coupe] Help me be removed from mailing list please

> To: anolan68 at yahoo.com, Mercedes Coupes Mailing Lists

> <mbcoupes at mbcoupes.com>

> Message-ID: <48B06CE0.2000909 at landiss.com>

> Content-Type: text/plain; charset="us-ascii"

>

> An HTML attachment was scrubbed...

> URL: <

> http://www.pairlist.net/pipermail/mbcoupes/attachments/20080823/362a45d8/attachment.html

> >

>

> ------------------------------

>

> Message: 3

> Date: Sat, 23 Aug 2008 16:31:02 -0400

> From: "Dick Spellman" <dick.spellman at gmail.com>

> Subject: Re: [W126 Coupe] Electrical / start problem

> To: "Mercedes Coupes Mailing Lists" <mbcoupes at mbcoupes.com>

> Message-ID:

> <c0bf8e840808231331y37810eebjbf6d288792a0a737 at mail.gmail.com>

> Content-Type: text/plain; charset="iso-8859-1"

>

> Hi Shin,

>

> My independent mechanic and I met today for coffee. I explained your

> symptoms. He suggests you check the ignition switch connector where the

> harness meets the back of the ignition key assembly. He's seen the

> behavior

> you describe on other MB's and says it's a $20 MB dealer part but, he

> charges $200 with labor to do the repair.

>

> Good luck,

> Dick

>

> On Fri, Aug 22, 2008 at 5:21 PM, Shin Takei <shinzbox at aol.com> wrote:

>

> > Hi all,

> > Recently my '91 560 SEC has had slow starting. When the ignition is

> turned

> > on, all the lights in the instrument panel come on and when cranked, it

> is

> > slow and the wiper turns on without the switch being on. Then it starts

> and

> > maintains until the engine is shut off and the same is repeated. All

> > indicator lights including charging turns off when the engine is on. This

> > has been going on for at least two weeks so I checked the battery voltage

> > which reads 12.45 with engine off and 13.65 with engine on. So it can't

> be

> > the battery and it seems to be charging. Any ideas on what it could be?

> Some

> > short along the way? dieing regulater?

> > Thanks to all of you experts.

> >

> > Shin

> >

> > The MB Coupes Website!

> > W126 SEC Mailing List

> > Postings remain property of MB Coupes, L.L.C.

> >

> -------------- next part --------------

> An HTML attachment was scrubbed...

> URL: <

> http://www.pairlist.net/pipermail/mbcoupes/attachments/20080823/ee21819c/attachment.htm

> >

>

> ------------------------------

>

> Message: 4

> Date: Sat, 23 Aug 2008 21:19:29 +0000

> From: Mister McGoo <eelploot at hotmail.com>

> Subject: Re: [W126 Coupe] Electrical / start problem

> To: Mercedes Coupes Mailing Lists <mbcoupes at mbcoupes.com>

> Message-ID: <BLU134-W46774CAF7CB6967F3B1C8ECB650 at phx.gbl>

> Content-Type: text/plain; charset="iso-8859-1"

>

> Hi,"....He suggests you check the ignition switch connector where the

> harness meets the back of the ignition key assembly. He's seen the behavior

> you describe on other MB's and says it's a $20 MB dealer part but, he

> charges $200 with labor to do the repair....."

>

> Haha. Why? Because if the problem is the ignition switch (the other end

> of the ignition/steering lock assembly to which the wiring harness plugs)

> the easiest way to get at it on the W126 is to remove the engine and use a

> torch to cut holes in the firewalls beside the steering column. And THAT

> operation is a piece of cake compared to what is necessary the W124!!

>

> Seriously, I question whether that is the problem. When you turn the

> ignition "on" all the dash warning lights light (including the low fuel),

> right? That's normal. That's your "test" to see that all your warning

> lights work. When you further engage the starter the warning lights will go

> out when the engine starts. That's normal.

>

> Question: Do your wipers come "on" when you turn the key to ignition

> position, and do they also keep running independently of the wiper switch

> when the engine is running? What happens when you actually turn the wipers

> "on"? (I have lost your original message, I suspect the wipers still run).

> What happens when you switch the wipers to intermittent? What happens when

> you switch to fast speed?

>

> Power is provided to the wiper switch (& relay) through the ignition switch

> and the wipers will only work when the ignition is "on". The problem is

> likely with the wiper switch itself, not the ignition switch. Sounds like

> your ignition switch performs perfectly normally and your wiper switch is

> locked (broken) "on".

>

> By coincidence actually, we were just talking about how to remove the turn

> signal/wiper assembly. Except in your case you have airbags.

> Unfortunately, the easiest way to remove the wiper stalk assembly in YOUR

> car is to remove the engine and cut the steering shaft off at the steering

> box .... I'M JUST KIDDING!!! but DO ask someone about dealing with the

> airbag equipped steering wheel... I have had no experience. And DON'T try

> anything about removing that steering wheel without fully understanding the

> procedure!

>

> -Bellamy

>

>

>

>

>

>

>

> _________________________________________________________________

> Find hidden words, unscramble celebrity names, or try the ultimate

> crossword puzzle with Live Search Games. Play now!

> http://g.msn.ca/ca55/212

> -------------- next part --------------

> An HTML attachment was scrubbed...

> URL: <

> http://www.pairlist.net/pipermail/mbcoupes/attachments/20080823/0f5ebd97/attachment.html

> >

>

> ------------------------------

>

> Message: 5

> Date: Sat, 23 Aug 2008 21:54:09 -0400

> From: Shin Takei <shinzbox at aol.com>

> Subject: Re: [W126 Coupe] Electrical / start problem

> To: mbcoupes at mbcoupes.com

> Message-ID: <8CAD3A36EF2FE89-1464-498B at webmail-mf02.sysops.aol.com>

> Content-Type: text/plain; charset="us-ascii"

>

>

> Dick,

>

>

> Wow, I'm glad you are friends with your wrench enough to have coffee. I

> will definitely look into it.

>

> Thanks

>

> Shin

>

>

>

>

> -----Original Message-----

> From: Dick Spellman <dick.spellman at gmail.com>

> To: Mercedes Coupes Mailing Lists <mbcoupes at mbcoupes.com>

> Sent: Sat, 23 Aug 2008 1:31 pm

> Subject: Re: [W126 Coupe] Electrical / start problem

>

>

>

>

>

>

>

>

>

>

> Hi Shin,

>

> My independent mechanic and I met today for coffee.? I explained your

> symptoms.? He suggests you check the ignition switch connector where the

> harness meets the back of the ignition key assembly.? He's seen the behavior

> you describe on other MB's and says it's a $20 MB dealer part but, he

> charges $200 with labor to do the repair.

>

>

> Good luck,

> Dick

>

>

> On Fri, Aug 22, 2008 at 5:21 PM, Shin Takei <shinzbox at aol.com> wrote:

>

>

> Hi all,

>

> Recently my '91 560 SEC has had slow starting. When the ignition is turned

> on, all the lights in the instrument panel come on and when cranked, it is

> slow and the wiper turns on without the switch being on.? Then it starts and

> maintains until the engine is shut off and the same is repeated. All

> indicator lights including charging turns off when the engine is on. This

> has been going on for at least two weeks so I checked the battery voltage

> which reads 12.45 with engine off and 13.65 with engine on. So it can't be

> the battery and it seems to be charging. Any ideas on what it could be? Some

> short along the way? dieing regulater?

>

>

> Thanks to all of you experts.

>

>

>

> Shin

>

>

>

>

>

> The MB Coupes Website!

>

> W126 SEC Mailing List

>

> Postings remain property of MB Coupes, L.L.C.

>

>

>

>

>

>

>

>

>

>

>

>

>

> The MB Coupes Website!

> W126 SEC Mailing List

> Postings remain property of MB Coupes, L.L.C.

>

>

>

>

>

> -------------- next part --------------

> An HTML attachment was scrubbed...

> URL: <

> http://www.pairlist.net/pipermail/mbcoupes/attachments/20080823/f5f83408/attachment.htm

> >

>

> ------------------------------

>

> Message: 6

> Date: Sat, 23 Aug 2008 23:08:54 -0400

> From: Axel Wulff <axelwulff at hotmail.com>

> Subject: Re: [W126 Coupe] Off Topic (ish) - Electric Rear Blind...

> To: Mercedes Coupes Mailing Lists <mbcoupes at mbcoupes.com>

> Message-ID: <BLU149-W169C61A6466593A57392BDB1640 at phx.gbl>

> Content-Type: text/plain; charset="iso-8859-1"

>

>

> The curved guide rod may work on the sedan as well, though it is longer

> than the straight one for the sedan.

>

> In any case, the curved guide rod is closer to the glass at the

> top.Regards, Axel J. Wulff610-731-5453 Cellular610-572-4611 Home

>

>

>

> From: jon-lu974 at hotmail.co.ukTo: mbcoupes at mbcoupes.comDate: Sat, 23 Aug

> 2008 07:43:11 +0000Subject: Re: [W126 Coupe] Off Topic (ish) - Electric Rear

> Blind...

>

>

> Morning Axel, Yes it does, many thanks - it makes sense now :o) I bought a

> sedan guide rail with my service bits and peices and it has a slight bend

> near one end - it was just to figure out which end the bend went - i'll have

> a play when i go to install it after the retrim.Thanks again Jon

>

>

>

> From: axelwulff at hotmail.comTo: mbcoupes at mbcoupes.comDate: Fri, 22 Aug 2008

> 18:41:17 -0400Subject: Re: [W126 Coupe] Off Topic (ish) - Electric Rear

> Blind...

>

> Jon, I installed the electric blind in my SEC. The one I bought was tan and

> I had to retrim it in gray. A bit of work, but nothing too demanding. 1. The

> kinked rod guide is not for the sedan, it is for the coupe. You can get the

> straight rod guide from your local dealer.2. Yes, the spring goes on top of

> the toothed guide rod, between the guide rod and the blind pulley.3. No, the

> blind is not attached to the rod. It retracts when the rod is lowered. Hope

> this helps.Regards, Axel J. Wulff610-731-5453 Cellular610-572-4611 Home

>

>

>

> From: jon-lu974 at hotmail.co.ukTo: mbcoupes at mbcoupes.comDate: Fri, 22 Aug

> 2008 09:08:02 +0000Subject: [W126 Coupe] Off Topic (ish) - Electric Rear

> Blind...

>

> Hi Everybody, I'm after a bit of info on the rear electric blind for the

> W126... I've just been able to find a rear electric blind for my SEL which

> needs a bit of repair and a retrim. the blind has come to me in a

> collection of bits but I have been able to purchase some missing or broken

> parts from mercedes to make it work again but i have 3 questions which i'm

> hoping somebody can answer which will stop me taking the blind in my SEC

> apart. 1. The kink in the SEL guide rod - does it go at the top or the

> bottom? 2. I have been given a spring, which the guide from mercedes goes

> between the white toothed rod and the black blind fixing - is this just a

> buffer or is it supposed to be attached to the 2 parts? 3. In relation to

> question 2 - if the blind is not attached to the rod does the blind

> automatically retract by the blind's spring loading? Thanks Jon

>

>

>

> Win ?3000 to spend on whatever you want at Uni! Click here to WIN!

>

>

>

> Find out how to make Messenger your very own TV! Try it Now!

> -------------- next part --------------

> An HTML attachment was scrubbed...

> URL: <

> http://www.pairlist.net/pipermail/mbcoupes/attachments/20080823/0af3b7f8/attachment.html

> >

>

> ------------------------------

>

> Message: 7

> Date: Sat, 23 Aug 2008 20:25:33 -0700

> From: Camran Nassiri <mbzman560 at hotmail.com>

> Subject: [W126 Coupe] Gear Shift Lever Removal

> To: <mbcoupes at mbcoupes.com>

> Message-ID: <BAY124-W242AE9F6C5D4CEB6F404D3EB640 at phx.gbl>

> Content-Type: text/plain; charset="windows-1252"

>

>

> Can someone explain how to remove the gear shift lever (knob)? I got as

> far as removing the wood piece around the gear shift; but, no luck in

> loosening the two bolts that hold the gear shift laver. How do I get a tool

> in place to loosen up the bolts? I looked through the archives to no

> avail.Thanks,Camran

> 90 560SEC, 91 410SEL, 80 240D

> _________________________________________________________________

> Be the filmmaker you always wanted to be?learn how to burn a DVD with

> Windows?.

> http://clk.atdmt.com/MRT/go/108588797/direct/01/

> -------------- next part --------------

> An HTML attachment was scrubbed...

> URL: <

> http://www.pairlist.net/pipermail/mbcoupes/attachments/20080823/baf78c81/attachment.htm

> >

>

> ------------------------------

>

> Message: 8

> Date: Sat, 23 Aug 2008 20:37:21 -0700 (PDT)

> From: Gary <garysalas at yahoo.com>

> Subject: Re: [W126 Coupe] Help me be removed from mailing list please

> To: anolan68 at yahoo.com, Mercedes Coupes Mailing Lists

> <mbcoupes at mbcoupes.com>

> Message-ID: <797012.78140.qm at web31907.mail.mud.yahoo.com>

> Content-Type: text/plain; charset="iso-8859-1"

>

> i wasn't trying to get off of the list but somehow i did once and believe

> it happen by me putting their email list on my block addresses and they, mb

> coupes, asked that if i didn't do something, can't remember now, that they

> would remove from the list. they gave me 3 warnings and after the 3rd i

> got off and had to re-subscribe.

>

> so the solution, just put them on block and at a minimum you won't get

> the emails

>

> ANDREW NOLAN <anolan68 at yahoo.com> wrote:

> Hi

> Can I get help from anyone to remove me from this mailing list? I am in

> poor health and have no time for this anymore. Thank you.

> anolan68 at yahoo.com

>

> The MB Coupes Website!

> W126 SEC Mailing List

> Postings remain property of MB Coupes, L.L.C.

> -------------- next part --------------

> An HTML attachment was scrubbed...

> URL: <

> http://www.pairlist.net/pipermail/mbcoupes/attachments/20080823/4fd2dad7/attachment-0001.html

> >

>

> ------------------------------

>

> Message: 9

> Date: Sat, 23 Aug 2008 20:45:31 -0700 (PDT)

> From: Gary <garysalas at yahoo.com>

> Subject: Re: [W126 Coupe] how to take radio out ?

> To: Mercedes Coupes Mailing Lists <mbcoupes at mbcoupes.com>

> Message-ID: <699836.47857.qm at web31905.mail.mud.yahoo.com>

> Content-Type: text/plain; charset="iso-8859-1"

>

> thanks markus and dick for the help the info on link is great. think

> i can take it from here

>

> i'll probably just put in a cd player after i get torn apart. thanks

> again

>

> Markus Meyer <mfm at meyerprobateproperties.com> wrote:

>

> what year and model? Not all needed a code. See here for your

> model/year and it will tell you if a code is needed:

>

> http://web.mac.com/dakota/Mercedes/Becker.html

>

> Markus Meyer

> mfm at meyerprobateproperties.com

> www.meyerprobateproperties.com

> Meyer Probate & Properties, LLC

> 484-919-9762

>

> -------- Original Message --------

> Subject: Re: [W126 Coupe] how to take radio out ?

> From: "Dick Spellman" <dick.spellman at gmail.com>

> Date: Fri, August 22, 2008 10:22 pm

> To: "Mercedes Coupes Mailing Lists" <mbcoupes at mbcoupes.com>

>

> There's a great idea and yes just punch the 4-digit code in when prompted

> and you are good to go. If you make a mistake it sets a timer and you'll

> have to wait it out before punching the code in yet again.

> Good luck,

> Dick

>

> On Fri, Aug 22, 2008 at 10:16 PM, Gary <garysalas at yahoo.com> wrote:

> say i go to the same yard and the car is still there. i get the vin,

> give the vin to mb dealer. then what happens? what's the deal with the

> code. am i going to punch into the radio so it will work?

>

>

> Dick Spellman <dick.spellman at gmail.com> wrote: Good question, I don't

> know the answer. Perhaps someone on the list can chime in, otherwise I'd

> try a call to your local MB dealer to see if any identifying numbers on the

> radio will be of help in obtaining the code.

>

> Dick

>

> On Fri, Aug 22, 2008 at 9:35 PM, Gary <garysalas at yahoo.com> wrote:

> i took one out of a junk yard car. what do i do in that case?

>

>

> Dick Spellman <dick.spellman at gmail.com> wrote: sort of Gary. You need

> to run a length of solid wire down either side to release the clips if it's

> the original Becker. Also, you'll need the code if you pull it and plan on

> using it again. Your VIN taken to the MB dealer will get you the code.

>

> -\Dick

>

> On Fri, Aug 22, 2008 at 6:30 PM, Gary <garysalas at yahoo.com> wrote:

> ...after you take all the stuff off and the radio is exposed is it just

> those two silver clips that have to be pushed down and the radio just slides

> out?

>

> anyone

>

> The MB Coupes Website!

> W126 SEC Mailing List

> Postings remain property of MB Coupes, L.L.C.

>

>

>

> The MB Coupes Website!

> W126 SEC Mailing List

> Postings remain property of MB Coupes, L.L.C.

>

>

>

> The MB Coupes Website!

> W126 SEC Mailing List

> Postings remain property of MB Coupes, L.L.C.

>

>

>

> The MB Coupes Website!

> W126 SEC Mailing List

> Postings remain property of MB Coupes, L.L.C.

>

>

>

> The MB Coupes Website!

> W126 SEC Mailing List

> Postings remain property of MB Coupes, L.L.C.

>

>

>

>

> ---------------------------------

> The MB Coupes Website!

> W126 SEC Mailing List

> Postings remain property of MB Coupes, L.L.C. The MB Coupes Website!

> W126 SEC Mailing List

> Postings remain property of MB Coupes, L.L.C.

> -------------- next part --------------

> An HTML attachment was scrubbed...

> URL: <

> http://www.pairlist.net/pipermail/mbcoupes/attachments/20080823/f110fac3/attachment.htm

> >

>

> ------------------------------

>

> Message: 10

> Date: Sun, 24 Aug 2008 02:11:52 -0400

> From: Shin Takei <shinzbox at aol.com>

> Subject: Re: [W126 Coupe] Electrical / start problem

> To: mbcoupes at mbcoupes.com

> Message-ID: <8CAD3C76F68DF77-1464-4D75 at webmail-mf02.sysops.aol.com>

> Content-Type: text/plain; charset="us-ascii"

>

>

> Bellamy,

> Interesting you mention the W124 because the exact same thing iis happening

> to my wife's '94 E320. See below:

>

>

>

>

>

>

>

>

>

>

>

>

>

>

>

> "....He suggests you check the ignition switch connector where the harness

> meets the back of the ignition key assembly.? He's seen the behavior you

> describe on other MB's and says it's a $20 MB dealer part but, he charges

> $200 with labor to do the repair....."

>

> ?

>

> Haha.? Why?? Because?if the problem is the ignition switch (the other end

> of the ignition/steering lock assembly to which the wiring harness plugs)

> the easiest way to get at it on the W126 is to remove the engine and use a

> torch to?cut holes in the firewalls beside the steering column.? And THAT

> operation is a piece of cake compared to what is necessary?the W124!!

>

> ?

>

> Seriously, I question whether that is the problem.? When you turn the

> ignition "on" all the dash warning lights light (including the low fuel),

> right?? That's normal.? That's your "test" to see that all your warning

> lights work.? When you further engage the starter the warning lights will go

> out when the engine starts.? That's normal. THIS IS WHAT IS HAPPENING.

>

> ?

>

> Question: Do your wipers come "on" when you turn the key to ignition

> position, and do they also keep running independently of the wiper switch

> when the engine is running?? YES What happens when you actually turn the

> wipers "on"?? (I have lost your original message, I suspect the wipers?still

> run). YES. What happens when you switch the wipers to intermittent?? What

> happens when you switch to fast speed??? ALL POSITION WORKS UNTIL I SWITCH

> IT OFF. BY THIS TIME THE ENGINE IS OPERATING NORMALLY.

>

> ?

>

> Power is provided to the wiper switch (& relay)?through the ignition switch

> and the wipers?will only work when the ignition is "on".? The problem is

> likely with the wiper?switch itself, not the ignition switch.? Sounds like

> your ignition switch performs perfectly normally and your wiper switch is

> locked (broken) "on". IS THAT DRAWING THE POWER AWAY SO THE STARTING IS

> WEAK?

>

> ?

>

> By coincidence actually, we were just talking about how to remove the turn

> signal/wiper assembly.??Except in your case?you have airbags.?

> Unfortunately, the easiest way to remove the wiper?stalk assembly in?YOUR

> car is to remove the engine and cut the steering shaft off at the steering

> box?....? I'M JUST KIDDING!!!? but DO ask someone about dealing with the

> airbag equipped steering wheel... I have had no experience.? And DON'T

> try?anything?about removing that steering wheel?without fully understanding

> the procedure! I HAVE REPLACED MY W126 STEERING WHEEL WITH A WOODEN ONE.

> JUST DISENGAGE THE AIRBAG CONNECTOR UNDER THE PASSENGER FOOTWELL

> CARPET/RUBBER MAT, UNSCREW THE 2 HEX BOLTS BEHIND THE STEERING WHEEL AND

> CAREFULLY LIFT AWAY THE AIR BAG COVER. THEN THE NORMAL STEERING WHEEL BOLT

> APPEARS.? I DISCONNECTED THE BATTERY FOR ADDITIONAL SAFETY.

>

> THANKS FOR YOUR INPUT.

>

> ?

>

> SHIN

>

> ?

>

> ?

>

>

>

>

>

>

>

>

>

>

>

> ?

>

>

>

> =

>

>

>

>

>

>

>

>

> The MB Coupes Website!

> W126 SEC Mailing List

> Postings remain property of MB Coupes, L.L.C.

>

>

>

>

>

> -------------- next part --------------

> An HTML attachment was scrubbed...

> URL: <

> http://www.pairlist.net/pipermail/mbcoupes/attachments/20080824/7b777813/attachment-0001.html

> >

>

> ------------------------------

>

> Message: 11

> Date: Sun, 24 Aug 2008 09:28:39 +0000

> From: Jon Pridham <jon-lu974 at hotmail.co.uk>

> Subject: Re: [W126 Coupe] Off Topic (ish) - Electric Rear Blind...

> To: Mercedes Coupes Mailing Lists <mbcoupes at mbcoupes.com>

> Message-ID: <BLU121-W50621257DE679689B86F9DF7640 at phx.gbl>

> Content-Type: text/plain; charset="iso-8859-1"

>

>

> Hi Axel,

>

> Thanks again for the info.

>

> Jon

>

> 560SEC

> 560SEL

>

>

>

> From: axelwulff at hotmail.comTo: mbcoupes at mbcoupes.comDate: Sat, 23 Aug 2008

> 23:08:54 -0400Subject: Re: [W126 Coupe] Off Topic (ish) - Electric Rear

> Blind...

>

>

> The curved guide rod may work on the sedan as well, though it is longer

> than the straight one for the sedan. In any case, the curved guide rod is

> closer to the glass at the top.Regards, Axel J. Wulff610-731-5453

> Cellular610-572-4611 Home

>

>

>

> From: jon-lu974 at hotmail.co.ukTo: mbcoupes at mbcoupes.comDate: Sat, 23 Aug

> 2008 07:43:11 +0000Subject: Re: [W126 Coupe] Off Topic (ish) - Electric Rear

> Blind...

>

> Morning Axel, Yes it does, many thanks - it makes sense now :o) I bought a

> sedan guide rail with my service bits and peices and it has a slight bend

> near one end - it was just to figure out which end the bend went - i'll have

> a play when i go to install it after the retrim.Thanks again Jon

>

>

>

> From: axelwulff at hotmail.comTo: mbcoupes at mbcoupes.comDate: Fri, 22 Aug 2008

> 18:41:17 -0400Subject: Re: [W126 Coupe] Off Topic (ish) - Electric Rear

> Blind...

>

> Jon, I installed the electric blind in my SEC. The one I bought was tan and

> I had to retrim it in gray. A bit of work, but nothing too demanding. 1. The

> kinked rod guide is not for the sedan, it is for the coupe. You can get the

> straight rod guide from your local dealer.2. Yes, the spring goes on top of

> the toothed guide rod, between the guide rod and the blind pulley.3. No, the

> blind is not attached to the rod. It retracts when the rod is lowered. Hope

> this helps.Regards, Axel J. Wulff610-731-5453 Cellular610-572-4611 Home

>

>

>

> From: jon-lu974 at hotmail.co.ukTo: mbcoupes at mbcoupes.comDate: Fri, 22 Aug

> 2008 09:08:02 +0000Subject: [W126 Coupe] Off Topic (ish) - Electric Rear

> Blind...

>

> Hi Everybody, I'm after a bit of info on the rear electric blind for the

> W126... I've just been able to find a rear electric blind for my SEL which

> needs a bit of repair and a retrim. the blind has come to me in a

> collection of bits but I have been able to purchase some missing or broken

> parts from mercedes to make it work again but i have 3 questions which i'm

> hoping somebody can answer which will stop me taking the blind in my SEC

> apart. 1. The kink in the SEL guide rod - does it go at the top or the

> bottom? 2. I have been given a spring, which the guide from mercedes goes

> between the white toothed rod and the black blind fixing - is this just a

> buffer or is it supposed to be attached to the 2 parts? 3. In relation to

> question 2 - if the blind is not attached to the rod does the blind

> automatically retract by the blind's spring loading? Thanks Jon

>

>

>

> Win ?3000 to spend on whatever you want at Uni! Click here to WIN!

>

>

>

> Find out how to make Messenger your very own TV! Try it Now!

> _________________________________________________________________

> Get Hotmail on your mobile from Vodafone

> http://clk.atdmt.com/UKM/go/107571435/direct/01/

> -------------- next part --------------

> An HTML attachment was scrubbed...

> URL: <

> http://www.pairlist.net/pipermail/mbcoupes/attachments/20080824/ca4b0453/attachment.htm

> >

>

> ------------------------------

>

> The MB Coupes Website!

> W126 SEC Coupes

> Postings remain property of MB Coupes, L.L.C.

>

> End of MBCOUPES Digest, Vol 48, Issue 30

> ****************************************

>

>

>

>

> ------------------------------

> It's only a deal if it's where *you* want to go. Find your travel deal *

> here* <http://information.travel.aol.com/deals?ncid=aoltrv00050000000047>.

>

> The MB Coupes Website!

> W126 SEC Mailing List

> Postings remain property of MB Coupes, L.L.C.

>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.pairlist.net/pipermail/mbcoupes/attachments/20080824/205f975d/attachment.html>


More information about the MBCOUPES mailing list