[W126 Coupe] FGS Switch Installation Query...

[Jon Pridham]

Hi Everybody.
 
Has anybody recently fitted the FGS Switch?
 
I'm asking as i have a query on how to wire up the ABS cable into the BNC Connectors.
 
I have a pink and white cable - which colour cable goes where on the BNC?
 
I presently have it wired that the pink is in the centre and the white on the outside - is this correct?
 
Additionally when i now reach approx 10mph the ABS light comes on - so its either wrong - or i have an issue with my soldering! - or worse! :o(
 
All the other wiring is in place - infact the unit works when put into 'S' - all the lights light up as they should - but holds onto first gear too long for my liking at the moment possibly due to the issue with the signal from the ABS cable.
 
Any help would be much appreciated as i've emailed the FGS guys and not had a definative repy, and the detailed wiring diagram doesn't show me what i'm after. Worst of all is that my car is sitting on the driveway wanting to be driven! ARGH!!!!
 
Thanks
 
Jon
 
560 SEC
560SEL
 
_________________________________________________________________
100’s of prizes to be won at BigSnapSearch.com 
http://www.bigsnapsearch.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.pairlist.net/pipermail/mbcoupes/attachments/20080425/e27ba2fe/attachment.htm>