[W126 Coupe] Window problem

[Louis Miller]

I am no expert, so feel free to ignore this, but I had a similar problem in an old (1966 Toronado, speaking of Michigan) car I own and the problem turned out to be the wiring where it fed through the flexible tunnel from the door to the body. Only my driver's door had a problem. The driver's door window  motor worked fine, but wasn't receiving power except occasionally.  All the other windows worked from their individual switches. Hope this is of use.

Lou Miller


----- Original Message ----- 
From: Stein Stromsoe 
To: mbcoupes at mbcoupes.com
Sent: 4/16/2008 9:08:17 PM 
Subject: [W126 Coupe] Window problem


Greetings from Manchester, MI
My (wife’s …boohoo…) 400 E (92) has an electrical problem with the driver window.
Window motor is ok, but power is, at times, continuously supplied to the motor in the down position. 
The switch is ok, (swapped out) and the window will open (and get stuck down) even if any other window is operated.
I supplied 12 volt to motor, got it closed, and disconnected. All other windows are fine at this time.
Could this have something to do with the “All window closure” function on the driver door lock?
Any and all comments are welcome.
 
Stein
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.pairlist.net/pipermail/mbcoupes/attachments/20080417/92189106/attachment.html>