[W126 Coupe] trunk lock

[Mister McGoo]

You ARE using the square key, not the round one, yes?  I certainly don't mean to be insulting.  But it's funny how many people NEVER use the round (valet) key for years and then forget what it is for.
 
Also....  if the tumbler is troublesome, use some Schließzylinderfett.  


From: eelploot at hotmail.comTo: mbcoupes at mbcoupes.comDate: Sat, 8 Sep 2007 21:48:45 +0000Subject: Re: [W126 Coupe] trunk lock


K. It's not likely a wiring problem.  Mike is likely giving a possible way of getting the trunk open.  Put some weight on the trunk lid and rapidly push the button in and let it snap out many times.  Does the button actually snap back on its own?  If that fails try lifting the lid gently and do the same.  If the lock is in the twelve o'clock position it should be unlocked, but the horizontal locking pin may have disconnected or stuck for some reason in the secondary locking hole.  (Someone has just included good pictures... can't remember who)  You would be hoping that the pin would rattle back (to the right) to the "unlock" position... suddenly the lid would open.  That's possibility #1.  (there's a couple more) You say the lock won't turn 90 degrees to three o'clock?  That's the "lock" position.  -Bellamy


> From: 560sec at comcast.net> To: mbcoupes at mbcoupes.com> Date: Sat, 8 Sep 2007 11:47:07 -0400> Subject: Re: [W126 Coupe] trunk lock> > Thanks for the help But the lock is in the 12 0`clock position and will not> turn and trunk is locked. Could it be a wiring problem > > -----Original Message-----> From: mbcoupes-bounces at mbcoupes.com [mailto:mbcoupes-bounces at mbcoupes.com]> On Behalf Of Chet Hwilka> Sent: Saturday, September 08, 2007 8:46 AM> To: 'Mercedes Coupes Mailing Lists'> Subject: Re: [W126 Coupe] trunk lock> > K,> > The trunk lock has a dual locking system. In addition to the button latch,> there is a bolt style lock that is normally engaged by turning the key to> the 3 o'clock position and removing the key. The trunk can not be unlocked> with the valet key. > The problem that can happen, is the bolt linkage pops off and allows the> bolt to float around, it slides into a lock position and you can't unlock> it.> > http://mywebpages.comcast.net/chwilka/secondary_trunk_bolt_lock.htm> > Hope this helps.> Chet> > > -----Original Message-----> From: mbcoupes-bounces at mbcoupes.com [mailto:mbcoupes-bounces at mbcoupes.com]> On Behalf Of KBF> Sent: Friday, September 07, 2007 7:53 PM> To: 'Mercedes Coupes Mailing Lists'> Subject: [W126 Coupe] trunk lock> > Hi > > I can not get my Trunk open with or without the key anyone know how the> locks work.> > Thanks K> > The MB Coupes Website!> W126 SEC Mailing List> Postings remain property of MB Coupes, L.L.C.> > > The MB Coupes Website!> W126 SEC Mailing List> Postings remain property of MB Coupes, L.L.C.> > The MB Coupes Website!> W126 SEC Mailing List> Postings remain property of MB Coupes, L.L.C.


Invite your mail contacts to join your friends list with Windows Live Spaces. It's easy! Try it! 
_________________________________________________________________
News, entertainment and everything you care about at Live.com. Get it now!
http://www.live.com/getstarted.aspx
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.pairlist.net/pipermail/mbcoupes/attachments/20070908/87699d64/attachment.html>