[W126 Coupe] Help - my motor blew a hole

[Steve Lemberg]

Alex,

Welcome to the club, I am in the process of changing this now.     The part number is 116 140 06 18 and I strongly suggest you use a factory part.

Steve
  ----- Original Message ----- 
  From: Alexander Hochhausl 
  To: mbcoupes at mbcoupes.com 
  Sent: Tuesday, September 04, 2007 7:21 PM
  Subject: [W126 Coupe] Help - my motor blew a hole


   
  Well, sort of - with help from me. I have the issue with my 560 SEC motor.

   

  The plastic part bolted to the bottom of the fuel distributor assembly (not the distributor, but the whole assembly which houses the airflow meter, etc), which connects to the throttle body cracked and broke - not repairable. It's a long story (I'm the guy with the Supercharger, but my blow-off valve did not work properly, so it probably saw 20 PSI+ upon closing the throttle at full load and high RPM - oops). So I need to replace this, and fast - it's my daily driver and now I'm on the motorcycle as long as they days are warm and dry. Does anyone know where I can get a replacement. I'd rather just buy the plastic part if it's available rather than the whole assembly.

   

  Help & Thanks !!!

   

  Thank You,

   

  Alexander Hochhausl, PE

  Tel: 516-909-3794

   



------------------------------------------------------------------------------


  The MB Coupes Website!
  W126 SEC Mailing List
  Postings remain property of MB Coupes, L.L.C.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.pairlist.net/pipermail/mbcoupes/attachments/20070904/cc9a4e9a/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/gif
Size: 862 bytes
Desc: not available
Url : <http://www.pairlist.net/pipermail/mbcoupes/attachments/20070904/cc9a4e9a/attachment.gif>