[W126 Coupe] Help - my motor blew a hole

[Alexander Hochhausl]

Well, sort of - with help from me. I have the issue with my 560 SEC
motor.
 
The plastic part bolted to the bottom of the fuel distributor assembly
(not the distributor, but the whole assembly which houses the airflow
meter, etc), which connects to the throttle body cracked and broke - not
repairable. It's a long story (I'm the guy with the Supercharger, but my
blow-off valve did not work properly, so it probably saw 20 PSI+ upon
closing the throttle at full load and high RPM - oops). So I need to
replace this, and fast - it's my daily driver and now I'm on the
motorcycle as long as they days are warm and dry. Does anyone know where
I can get a replacement. I'd rather just buy the plastic part if it's
available rather than the whole assembly.
 
Help & Thanks !!!
 
Thank You,
 
Alexander Hochhausl, PE
Tel: 516-909-3794
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.pairlist.net/pipermail/mbcoupes/attachments/20070904/f8ffaf25/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.gif
Type: image/gif
Size: 862 bytes
Desc: not available
Url : <http://www.pairlist.net/pipermail/mbcoupes/attachments/20070904/f8ffaf25/attachment.gif>