[W126 Coupe] free at last and idle speed control

[James Fletcher]

Bellamy
            That is exactly what  I  need, you covered everything in 
detail , many thanks.
     James
 

Mister McGoo wrote:

> James;

>  

> This wiring is on a 1983 European 380SE.  The module part number is 

> 002 545 40 32.

>  

> Connector #1 is next to the locator pin (plastic) on the five side, #2 

> is on the opposite side of the locator on the four side.

>  

> 9 7 5 3 1 on one side and 8 6 4 2 on the other...

>  

> 1  black

> 2  black/red

> 3  green/yellow

> 4  brown

> 5  green/black

> 6  black/yellow

> 7  black/red

> 8  purple

> 9  blue/gray

>  

> You might have noticed that the manufacturer is loath to give you even 

> 2mm of extra wire.  So when re-assembling, you should find the proper 

> wires will all naturally fit in the right positions and order.  That 

> will be the check to confirm this is schematic is right.  Hope this helps.

>  

> - Bellamy 

>

>

>

>

> ------------------------------------------------------------------------

>

> <http://imagine-msn.com/messenger/launch80/default.aspx?locale=en-us&source=wlmailtagline>

> ------------------------------------------------------------------------

>

>

>