[W126 Coupe] free at last and idle speed control

[Mister McGoo]

James;
 
This wiring is on a 1983 European 380SE.  The module part number is 002 545 40 32.
 
Connector #1 is next to the locator pin (plastic) on the five side, #2 is on the opposite side of the locator on the four side.
 
9 7 5 3 1 on one side and 8 6 4 2 on the other...
 
1  black
2  black/red
3  green/yellow
4  brown
5  green/black
6  black/yellow
7  black/red
8  purple
9  blue/gray
 
You might have noticed that the manufacturer is loath to give you even 2mm of extra wire.  So when re-assembling, you should find the proper wires will all naturally fit in the right positions and order.  That will be the check to confirm this is schematic is right.  Hope this helps.
 
- Bellamy 




> Date: Thu, 24 May 2007 13:45:46 +1000> From: snow at snowy.net.au> To: mbcoupes at mbcoupes.com> Subject: [W126 Coupe] free at last and idle speed control> > Bellamy> Any help with that schematic would be great. I,m in a remote > location and finding any info for the euro,s is almost impossible.> James

_________________________________________________________________
Connect to the next generation of MSN Messenger 
http://imagine-msn.com/messenger/launch80/default.aspx?locale=en-us&source=wlmailtagline
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.pairlist.net/pipermail/mbcoupes/attachments/20070524/c51a811f/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: P5230005.JPG
Type: image/pjpeg
Size: 62729 bytes
Desc: not available
Url : <http://www.pairlist.net/pipermail/mbcoupes/attachments/20070524/c51a811f/attachment-0001.bin>