[W126 Coupe] Looking for a window regulator

[Dick Spellman]

Steve:

A few more thoughts.  Where you are dealing with the SEC  you may want 
to plan on a few blocks of wood to hold that glass in the base of the 
door at a reasonable height once the regulator is removed.  I typically 
tape my glass by looping over the sedan door frame at the top of the 
window.  You do not have that luxury where it's a coupe.

Also, I did encounter a regulator on an early (86, I believe) sedan that 
had no bolt in the horizontal bar, just a nylon glide.  So, you may just 
have to go slow and remove each of the 10mm bolts that have a red dot 
painted on them.  These are the bolts for the lift and motor to the door 
frame and possibly the 1 on the rail.

Dick

>  
>