[W126 Coupe] Horn selector switch

[Vance Rowley]

Hi Carl,

 If you have the actual switch itself, why not just use a bit of solder, a soldering iron and some heat shrink. It's not as if you plan on unplugging it every week or so. That would certainly do the job.

Regards,
Vance.
  ----- Original Message ----- 
  From: Carl Hansen 
  To: Mercededes-Benz SEC Club 
  Sent: Monday, February 13, 2006 10:12 PM
  Subject: [W126 Coupe] Horn selector switch


  Help somebody, please.
  I have installed a set of compressor horns on my SEC and I need the plug that attaches to the back of the selector switch on the dash. Apparently the Euro SEC's are the only Mercedes cars that are equipped with city and highway horns. For some reason mine did not have that feature so I installed the compressor horns. The local M-B dealer supplied me with the proper switch but couldn't get me the connector plug. Any ideas out there where I can scare one up?
  Regards,
  Carl, 560 SEC 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.pairlist.net/pipermail/mbcoupes/attachments/20060214/b11e2137/attachment.htm