[W126 Coupe] AC vents

[Dick Spellman]

Hi Jack.

Glad to hear you got it worked out.  I've only seen the one rectangular 
vacuum element (cigarette pack shape) and it was mounted to the face of 
the heater box and controlled the leg flap doors on an 86 Euro 300SE 
1986.  It's the sedan I am driving in bad weather while the SEC is 
garaged.  All of the others have employed the barrel shaped element on 
the heater box.

Take care,

Dick

Jack wrote:

>Thanks Dick,
>
>I did figure it out after I posted this. That cover looked like it was
>molded into the housing. After digging through to CD I found out that that
>thing comes off.
>
>It's on the wife's '84 500sel euro, but it's pretty much the same as my
>SEC's.
>
>Where's the one that looks like a cigarette pack? Didn't see that one.
>
>Jack
>
>86 560 SEC 150k (parts car)
>87 560 SEC 88k
>84 500 SEL 130k euro
>
>==========================================================================
>Depending on your model year Jack it's either a vacuum element looking like
>a pack of cigarettes or it's the cylinder you are already familiar with from
>the defrost vent , etc. First, there is a black plastic cover that you need
>to carefully pry off of the heater box which covers the arm that connects
>the vacuum element to the heater box leg flap linkage. 
>Once you get the cover off it should be fairly obvious as to unclipping the
>vacuum element arm from the flap linkage and lifting or twisting the vacuum
>element off of the holder on the heater box.. When done you should have the
>vacuum element and the metal linkage in your hand. So, you are removing both
>the vacuum element and the metal linkage in one step.
>
>Be careful not to jostle the heater box flap linkage (the point where the
>vacuum arm clips in place) too much as the pivots inside the heater box can
>only be repaired by removing the entire box. Not a fun job at all! Anyway,
>it's a quick fix with the cover out of the way and the element with arm in
>your hands.
>
>Regards,
>
>Dick
>==========================================================================
>Jack wrote:
>
>  
>
>>Hi MB Gurus,
>>
>>The A/C always blows out the defroster, so I bought all the vacuum 
>>elements and found some bad ones. However,Im trying to change out the 
>>vacuum control for the leg flaps, element 39 in the manual. Stupid 
>>question, how do you get this one out? The others are pretty 
>>straightforward, but this oneIts not only hard to get at, but it 
>>looks attached to the control arm If I do get this guy out how do I 
>>reattach the goofy thing?
>>
>>Help my whole dash is apart!!!!
>>
>>Jack
>>    
>>