[W126 Coupe] SUSPENSION QUESTION

[Mike R.]

I've lowered seven SECs and an SEL, including my '87 560SEC, and all were
able to have the front end adjusted back to MB specifications. I'd find
another alignment shop. As a last resort, take it to the local MB dealer as
they will know how to do it.

Later,
Mike R.

-----Original Message-----
From: mbcoupes-bounces at mbcoupes.com [mailto:mbcoupes-bounces at mbcoupes.com]
On Behalf Of Kenny Furuya
Sent: Wednesday, August 23, 2006 12:55 PM
To: mbcoupes at mbcoupes.com
Subject: [W126 Coupe] SUSPENSION QUESTION

I have a 1987 560 SEC and I installed performance springs which lowers the
ride height approximately 1 1/2 inches. The inside of my front tires are
wearing very quickly. I have tried to get the car aligned but the alignment
shops say because the car is lowered, they cannot get the car in alignment.
Does anyone know of a remedy for this other than re-installing my stock
springs?

Any help would be appreciated.

Thanks,

Kenny