[W126 Coupe] SUSPENSION QUESTION

[David Fatovic]

What are the dimensions of your wheels and tires? 
Also what is the offset you are running.  I am no
expert, but I know the incorrect offset will start to
give you some headaches.  I have both of my SECs (one
is RIP) lowered with the H&R Springs and didn't have a
problem in the front.  I did have a slight problem in
the rear though, but nothing to write home about.

David

--- Kenny Furuya <kfuruya at comcast.net> wrote:

> I have a 1987 560 SEC and I installed performance
> springs which lowers the
> ride height approximately 1 1/2 inches. The inside
> of my front tires are
> wearing very quickly. I have tried to get the car
> aligned but the alignment
> shops say because the car is lowered, they cannot
> get the car in alignment.
> Does anyone know of a remedy for this other than
> re-installing my stock
> springs?
> 
> Any help would be appreciated.
> 
> Thanks,
> 
> Kenny
> 
> The MB Coupes Website!
> W126 SEC Mailing List
> Postings remain property of MB Coupes, L.L.C.
>