[W126 Coupe] Seat switch conversion question

[Shayegan, Richard]

If my experience with an 85 380SE is relevant, 84 was a split year,
where even post 84 models without memory won't fit on pre 84 models
without memory. I suppose you could take it apart and figure out the
soldering, but it's definitely not plug and play.

 

________________________________

From: mbcoupes-bounces at mbcoupes.com
[mailto:mbcoupes-bounces at mbcoupes.com] On Behalf Of Dick Spellman
Sent: Friday, September 23, 2005 12:53 PM
To: mbcoupes at mbcoupes.com
Subject: [W126 Coupe] Seat switch conversion question

 

I have an 83 SEC with the passenger door seat control needing
replacement.  In 83 there was no seat memory button and the wiring
harness was soldered directly to the switch.

 

I have a 90 300SE parts car now with both memory seat switches working.
Does anyone know if the memory switch is interchangeable with the
non-memory switch and if so anything special about wiring or fit I need
to look at?

 

Many thanks,

 

Dick Spellman

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.pairlist.net/pipermail/mbcoupes/attachments/20050923/73ad8e3c/attachment.html