[W126 Coupe] seat belt presenters

[John Conley]

Thanks for the valuable information Dick.  I would
have probably went out and spent money that I do not
have to fix the presenter when it was something so
cheap and simple.  You guys are the bomb and I am glad
to be a part of this unique community.  That goes for
everyone that sent information about my problem.  I
appreciate having so many new friends out there.  

Thanks,

John Conley



--- Dick Spellman <spell.yy at verizon.net> wrote:

> Hi John:
> 
> As Malcolm suggests you can order replacement
> aluminum gears (vs. the original nylon) from George
> Murphy and then just follow the instructions on
> repair found in the MBCoupes website.  Should take
> all of 2 hours to do the project.  While you are in
> there you may as well get your hands on a can of MB
> slide paste (used for the sliding roof rails and
> linkage) and lube the arm linkage and the rear
> window lift.  The slide paste is available from
> Jonathan or Rusty for a few dollars.
> 
> One last thought, if your exterior rubber sill seal
> is worn or cracked you could do this project at the
> same time.  The seal on the side rear window is
> somewhat expensive because it wraps around the
> pillar and includes the interior seal as well.  It's
> all one piece.  Was $70 or so when I did mine a few
> years back.
> 
> Good luck,
> 
> Dick> The MB Coupes Website!
> W126 SEC Mailing List
> Postings remain property of MB Coupes, L.L.C.


John C. Conley


		
__________________________________ 
Yahoo! FareChase: Search multiple travel sites in one click.
http://farechase.yahoo.com