[W126 Coupe] final V1 hardwiring question
Shayegan, Richard
rishayegan at davidson.edu
Wed Feb 2 23:01:49 EST 2005
Ok, I found something (that improved index, while I admit it's improved,
always gave me trouble). I can't link direct to the screen grab so I'll
link to where it is
http://davidson.smugmug.com/gallery/374874/1/15255345
And it's hard to read unless you click original size (warning, its about
334kb).
I don't see where up by the domelight is a wire that's hot with the
ignition. All I see is a ground, a hot all the time, and a switch, but
the switch is for the domelight (i.e. door controlled, on, off, so only
on would work, but that would leave it on when the ignition is off and
leave the light on all the time). Maybe I'm reading this wrong though
since electronics was never my thing (well, they are in an r/c car, but
not in a real car).
Richard
-----Original Message-----
From: mbcoupes-bounces at mbcoupes.com
[mailto:mbcoupes-bounces at mbcoupes.com] On Behalf Of Steve Nervig
Sent: Wednesday, February 02, 2005 10:33 PM
To: Mercedes Coupes Mailing Lists
Subject: Re: [W126 Coupe] final V1 hardwiring question
On Feb 2, 2005, at 4:28 PM, Shayegan, Richard wrote:
> Ok, maybe this is the final question: Jonathan said the wire for the
> lamp becomes hot when the ignition is turned on, but for the light to
> turn on when the doors are opened, isn't it always hot?
> Richard
>
So, how about using the schematic to figuring out this question?
Steve
--
Entropy Needs No Maintenance
The MB Coupes Website!
W126 SEC Mailing List
Postings remain property of MB Coupes, L.L.C.
More information about the MBCOUPES
mailing list