[W126 Coupe] POWER

[Dan Landiss]

jralex at ix.netcom.com wrote:

>Dan, Would you explain in detail about how to wire the momentary switch to the kickdown switch.
>
The kickdown switch near the top of the gas pedal has two wires going to 
it. They may be under the carpet. Peel away a little of the insulation 
from each and solder one wire from the switch to each.

>It sounds like you would get a spring return switch with two wires each connected to some pin/leg on the kickdown button under the gas pedal.
>
Exactly. Were it not for the aesthetics, a doorbell button would be fine.

--
Never argue with a dragon, for you are crunchy and taste good with ketchup.