[W126 Coupe] Intermittant high idle question

[Matt Petersen]

Hopefully Jonathon is listening here, he got me my Bosch valve.
 
Matt.

  _____  

From: mbcoupes-bounces at mbcoupes.com [mailto:mbcoupes-bounces at mbcoupes.com]
On Behalf Of Richard Hogarth
Sent: Sunday, 21 August 2005 7:39 a.m.
To: 'Mercedes Coupes Mailing Lists'
Subject: RE: [W126 Coupe] Intermittant high idle question


Do you have any suggestions as to which vehicles have the same idle control
valve?
I need a new on also. 
thanks
axlehead at bellsouth.net

  _____  

From: mbcoupes-bounces at mbcoupes.com [mailto:mbcoupes-bounces at mbcoupes.com]
On Behalf Of Matt Petersen
Sent: Saturday, August 20, 2005 2:27 PM
To: 'Mercedes Coupes Mailing Lists'
Subject: RE: [W126 Coupe] Intermittant high idle question


Also be aware that you don't need to purchase a Mercedes idle control valve,
the Bosch component is used on other vehicles and is the exact same part and
is cheaper.
 
Matt.

  _____  

From: mbcoupes-bounces at mbcoupes.com [mailto:mbcoupes-bounces at mbcoupes.com]
On Behalf Of Mike R.
Sent: Sunday, 21 August 2005 2:55 a.m.
To: 'Mercedes Coupes Mailing Lists'
Subject: RE: [W126 Coupe] Intermittant high idle question



Dick,

High probability that you have the broken wire inside the idle air valve. I
know how to fix that and can tell you how to disassemble that $250 part and
fix it for $5. Give me a call!!

 

Later,

Mike R.

(702) 494-8056

  _____  

From: mbcoupes-bounces at mbcoupes.com [mailto:mbcoupes-bounces at mbcoupes.com]
On Behalf Of Dick Spellman
Sent: Friday, August 19, 2005 4:20 PM
To: mbcoupes at mbcoupes.com
Subject: [W126 Coupe] Intermittant high idle question

 

Well here is a subject that has only been explored 15,000 times.  Actually,
I just need to know what to use in cleaning the air valve.  I get a racing
(1100-1300rpm) at times and if I wait a minute the racing drops to normal
idle.  When I pull the air valve connector while the car is racing and move
the plug in and out a few times the racing drops to normal idle.

 

So, I am fairly confident it's this metal cylinder with two black hoses
coming off of it at the front of the engine.

 

Do I just pull this outa there and juice it up with carb cleaner and replace
or is there some other method???

 

Thank you,

 

Dick

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.pairlist.net/pipermail/mbcoupes/attachments/20050821/e40a848d/attachment.htm