[LargeFormat] Polaroid back light leak

[Lloyd Schultz]

It is a regular 545, (the kind I can disassemble and put back together
without any parts breaking) and I still can't figure out what is protruding.
It appears to be flat on the back, but something must be pushing something
else open.

Thanks for the input, and I'll remember that the 545i has some clearance
problems, too.

Best,
Lloyd
Lschultz2@nconnect.net

Nollite illegitimus contarere vos
----- Original Message -----
From: "Clive Warren" <Clive.Warren@megacycle.co.uk>
To: <largeformat@f32.net>
Sent: Wednesday, February 12, 2003 12:25 PM
Subject: Re: [LargeFormat] Polaroid back light leak


>
> If it is a 545i as opposed to a 545 then it may be the bulbous nature of
> the business end holding the holder slightly above the film plane and
> allowing the light in. I have had similar problems trying to use a 545i
> with an MPP Technical camera - luckily managed to spot the problems before
> exposing any film..... The older all metal 545 holders work perfectly.
>
> Cheers,
>             Clive
>
>
>
>
> _______________________________________________
> LargeFormat mailing list
> LargeFormat@f32.net
> http://www.pairlist.net/mailman/listinfo/largeformat
>