[LargeFormat] RE: New member

[philip.lambert]

Welcome to the new member!
The Linhof lensboard is likely to be the one like a Wista one size 96x99mm.
The flange hole is probably the usual one for a size O shutter (I mean the
size above the tiny shutter used on 65mm Angulons). You might need a
recessed lens board. This permits the front standard to be brought forward
by the amount of the recess and reduces the binding effect on the bellows
caused by compressing it to focus infinity with a 90mm.  I have a couple of
such panels for sale but you should check that I have given the size that
fits your Linhof and await the lens and measure the outside diameter of the
shutter flange ring before buying lens boards unseen. If it would help I can
take my 90mm off its 6x9 Linhof panel and measure its flange, assuming all
90mm Angulons were the same. Philip
----- Original Message -----
From: "Felix Lopez de Maturana" <fmaturana@euskalnet.net>
To: <largeformat@f32.net>
Sent: Tuesday, April 30, 2002 2:23 PM
Subject: [LargeFormat] RE: New member


> Hellow to everybody.
>
> I'm a new member from Spain. My name is Felix Lopez de Maturana and first
of
> all I should like to apologize by all the defective english I'm going to
> write down right now and in the future. My first question is: I have just
> bought a used Schneider-Kreuznach 90 mm F6.8 Synchro Compur Shutter B
(4x5)
> (35MT) and the lens board is for a Linhof Super Technika III. As my camera
> is a Super Technika IV I believe I have, compulsory, to change the lens
> board to a new one. I'm going to receive the lens next week. Do some list
> member knows which is exactly the Linhof lens board, type and size and
hole,
> I need in order to begin searching it?
>
> http://www.pairlist.net/mailman/listinfo/largeformat