[W126 Coupe] TX valve removal

Dick Spellman dick.spellman at gmail.com
Thu Oct 20 11:02:11 EDT 2011


Hi Dan,

I pulled this image of the expansion valve you are hunting for from
<www.autohausaz.com>. It will be covered with a firm foam cover.

-\Dick

On 10/19/2011 8:36 PM, L&D gardner wrote:

> Hi Folks

> First off many thanks for all the help and advise.

> I have removed the panel under the glove box (my car is RHD UK spec

> and all the information I have from the CD and other sources refers to

> LHD cars),before I remove parts, would the location of the TX valve

> have been changed for theses models ,I can see two refrigerant lines

> from the the left of the car (viewed from the rear)going to the centre

> console area but cannot see any TX valve ,I realise its difficult

> question in that most members probably would not be too familiar with

> RHD spec but any advise most welcome .

>

>

>

> Kind

> Regards Dan Gardner 1986 560 SEC (Euro 220kw)

>

> The MB Coupes Website!

> W126 SEC Mailing List

> Postings remain property of MB Coupes, L.L.C.



--
The information contained in this e-mail and the attachments, if any, is
legally privileged and CONFIDENTIAL. It is intended solely for the use
of the individual or entity to whom it is addressed and others
authorized to receive it. If you are not the intended recipient you are
hereby notified that any disclosure, copying, distribution, or taking
action in reliance of the contents of this information is strictly
prohibited and may be unlawful
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.pairlist.net/pipermail/mbcoupes/attachments/20111020/904205cf/attachment-0001.htm>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: fdbgddba.png
Type: image/png
Size: 101357 bytes
Desc: not available
Url : <http://www.pairlist.net/pipermail/mbcoupes/attachments/20111020/904205cf/attachment-0001.png>


More information about the MBCOUPES mailing list