[W126 Coupe] Power window motors

[Axel Wulff]

Yousef, I did some sound treatment on my doors a few years ago and if I remember correctly the material on the outer door skin you describe is the MB sound deadening. Assuming you're using a good CLD (contraint layer dampening), such as Dynamat, Raamat, Damplifier, etc., the new treatment will be more effective. You'll have to completely remove the window mechanism to apply the sound deadener so use the opportunity to completely clean everything and apply fresh grease to the cogs and rails. That should make things move a smoother and faster. While the stuff is out of the door, it's a good opportunity to inspect the attachment point and renew if necessary. Good luck on your project.

Regards,

Axel J. Wulff

610-731-5453 Cellular

610-572-4611 Home

 > From: usef4188 at gmail.com

> Date: Sat, 1 Oct 2011 23:55:26 +0400

> To: mbcoupes at mbcoupes.com

> Subject: [W126 Coupe] Power window motors

> 

> Hey all 

> 

> I have been removing the interior + dashboard in order to do sound deadening, lay cables for audio system and replace vacuum pods ..

> 

> Anyways I've removed the door panels and I have a few questions.. 

> 

> 1) my power windows are kinda slow goin up and down.. Could this be from old motors ? Does anyone know the specs on these motors and did anyone try replace them with better motors of some sort? 

> 

> 2) between the glass sheet and the outter panel there is a sheet of some material.. What is it for and can I loose it since am gonna use the sound deadening material?

> 

> Thanks

> Yousef

> 

> Sent from my iPad

> The MB Coupes Website!

> W126 SEC Mailing List

> Postings remain property of MB Coupes, L.L.C.

 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.pairlist.net/pipermail/mbcoupes/attachments/20111001/83637b13/attachment.htm>