[W126 Coupe] where is the

[Josh Allen]

On 6/5/2011 3:49 PM, Gary wrote:

> transmission front pump located? (leaking) also

> air/fuel adjustment screw ( is worn) and

> air flow sensor (is sticking)?

> i had a little work done at my independent mechanic and i was just 

> reading the invoice where he noted some recommendations.

> thanks for the help

>

>

> The MB Coupes Website!

> W126 SEC Mailing List

> Postings remain property of MB Coupes, L.L.C.

If you're talking about a w126 v8 engine car, the air fuel adjustment 
screw is under the intake filter housing, part of the air metering 
assembly(the air flow sensor by another name?).  I'm not sure how it'd 
be worn though...

The transmission front pump is inside the transmission, just behind the 
torque converter, and driven by the torque converter being slipped into 
it when installed in the front of the transmission.
It's replacement requires dropping the transmission free of the engine, 
pulling the torque converter, and then going after the pump, though 
likely only the transmission input shaft seal needs replacing if it's a 
leak that is the problem.

Now if this isn't a w126 car, the transmission comment likely applies, 
but I have no idea on the air related parts.

-Josh
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.pairlist.net/pipermail/mbcoupes/attachments/20110605/4abf7d22/attachment.htm>