[W126 Coupe] 560 misfire

[Jonathan Hodgman]

What is the duty cycle off pins 2 & 3 on the X11 port @ warm idle?

I had a wonky KE that would surge on decel @ 1500..


Jonathan

On 7/6/2011 8:05 AM, Markus Meyer wrote:

>

> If you have access to another 560 that doesn't have this problem, try 

> swapping ke jetronic computers and see what happens.  Was a problem on 

> one of my cars, swapping them made the problem switch cars so I knew 

> what to replace.

>

> Thanks,

> Markus

>

> On Jul 6, 2011 7:54 AM, "neville sleigh" 

> <nevillesleigh at optusnet.com.au <mailto:nevillesleigh at optusnet.com.au>> 

> wrote:

> > my 560 has a slight surge on 2000 to 2500 rpm in all gears .on 

> exceleration it is not noticeable but on a steady speed of 100kmp 

> /hour 2100 rpm it is a pain .I have taken her (my 560 ) to a bebz 

> dealer and had her serviced but still the same can any one help thanks 

> Nev.

>

>

> The MB Coupes Website!

> W126 SEC Mailing List

> Postings remain property of MB Coupes, L.L.C.


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.pairlist.net/pipermail/mbcoupes/attachments/20110706/1662c6da/attachment.htm>