[W126 Coupe] Horns not working

[Dick Spellman]

Ernie,

If you have a late model SEC, replace the 8 amp (white) fuse in position 7.
If you have an early model SEC, replace the 25 amp fuse (blue) in 
position 15.
If you do not have a replacement fuse, then use a jumper wire preferably 
with alligator clips across the fuse terminals or swap a known working 
fuse from another location temporarily then test the horn.

-\Dick

On 1/27/2011 2:56 PM, Ernie Stephens wrote:

> My horns stopped working. At the same time, I have a warning light on my dash that an electrical device (light bulb,etc) is malfunctioning.  I checked my fuse and it appears to be in good shape.  I suspect that there is a horn relay somewhere in the circuit but I don't have a wiring diagram; can anyone tell me what and where I should be looking for?

>

> Thanks,

> Ernie

> The MB Coupes Website!

> W126 SEC Mailing List

> Postings remain property of MB Coupes, L.L.C.



-- 
The information contained in this e-mail and the attachments, if any, is 
legally privileged and CONFIDENTIAL. It is intended solely for the use 
of the individual or entity to whom it is addressed and others 
authorized to receive it. If you are not the intended recipient you are 
hereby notified that any disclosure, copying, distribution, or taking 
action in reliance of the contents of this information is strictly 
prohibited and may be unlawful.