[W126 Coupe] Heater / AC Fan

[Michael Ramay]

Henry,
If you can't get an MB fuse, here's a suggestion. I went to my local auto
parts store and bought a 30-amp plug in fuse and holder with some short
wiring attached. After removing the broken strip fuse, the wires from the
new fuse holder were put under those screws. It worked fine for the week or
so it took to get the MB part.

On Sun, Feb 27, 2011 at 1:54 PM, Henry Viveiros <henryviv at oigp.net> wrote:


> Nothing—even the defrost button—changes the fan speed. I checked the

> fusible link outside the fuse box and it seemed to be OK, but when I poked

> at it, it broke. Maybe it broke because it was no good. I’ll get a few

> tomorrow when I get back into town.

>

> My first inclination was to touch the two wires that the fusible link

> connected, but I don’t want to cause any more problems than I already have.

>

> I will also get a new set of fuses and replace them all.

>

> Thanks Bellamy.

>

> The MB Coupes Website!

> W126 SEC Mailing List

> Postings remain property of MB Coupes, L.L.C.

>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.pairlist.net/pipermail/mbcoupes/attachments/20110227/e62f98c0/attachment.htm>