[W126 Coupe] "Whirring" noise in the engine
Markus Meyer
markusfmeyer at gmail.com
Tue Feb 1 10:10:39 EST 2011
Time to get a rubber tube or stethescope.
Thanks,
Markus
On Feb 1, 2011 10:08 AM, "Michael Ramay" <mike.ramay at gmail.com> wrote:
> Great idea but I still have the noise with all the v-belts off the car
> (nothing on the front of the motor rotating) and the smog pump wiring is
> unplugged.
>
> On Tue, Feb 1, 2011 at 6:25 AM, Olsson_Chris <Olsson at lumber.com> wrote:
>
>> I would bet money that it is your smog pump, sounds exactly like what I
had
>> going on.
>>
>>
>>
>> *From:* Michael Ramay [mailto:mike.ramay at gmail.com]
>> *Sent:* Tuesday, February 01, 2011 6:23 AM
>> *To:* Markus Meyer
>> *Cc:* Mercedes Coupes Mailing Lists
>> *Subject:* Re: [W126 Coupe] "Whirring" noise in the engine
>>
>>
>>
>> It's not turning and it's unplugged.
>>
>> On Tue, Feb 1, 2011 at 6:15 AM, Markus Meyer <markusfmeyer at gmail.com>
>> wrote:
>>
>> Is your air pump unplugged? That's what mine sounded like till I
>> unplugged it.
>>
>>
>>
>> Markus
>>
>> On Tue, Feb 1, 2011 at 9:00 AM, Michael Ramay <mike.ramay at gmail.com>
>> wrote:
>>
>> My '87 560SEL makes a "whirring" noise when it's first started. Sounds
>> almost like a bad bearing in the alternator and loud enough that my wife
is
>> commenting on it but in a mile or so it goes away.
>>
>> - I removed all the V-belts on the front of the motor, still have the
>> noise.
>> - Since it sounds like it's coming from the passenger side of the engine
up
>> high, I removed that valve cover then ran the engine - it was louder.
>> - Put in a new timing chain and new guides. !@#$%^&* - still have the
noise
>> but the car has noticeably more power.
>>
>> It REALLY needed the guides since one was broken in two and a 3" long
piece
>> is missing plus another had the hole for the retention pin wallowed out.
I
>> looked very carefully down the chain pathway during the installations but
no
>> sign of the piece.
>>
>> Will removal of the oil pan allow me to see much of the lower timing
chain
>> guide area? If the missing chain guide is jammed in there and rubbing on
the
>> rotating bits, why would the noise diminish in a minute or so of
operation?
>>
>> Suggestions??
>>
>> Thanks,
>> Mike
>>
>>
>>
>> The MB Coupes Website!
>> W126 SEC Mailing List
>> Postings remain property of MB Coupes, L.L.C.
>>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.pairlist.net/pipermail/mbcoupes/attachments/20110201/cd653a21/attachment.htm>
More information about the MBCOUPES
mailing list