[W126 Coupe] MBCOUPES Digest, Vol 83, Issue 12

[Michael Ramay]

Kinda just come out. There is a small bolt (13mm head) that is on the
outside, accessed in the center of brake hub. The other thing to remember is
that the six allen-headed bolts that hold the axle to the differential
flange are easily the hardest to remove that I've found on these cars. It
took my Mac Tools 1/2" impact gun at 120 psi to convince those bolts to
release.

On Tue, Apr 12, 2011 at 9:29 AM, Michael Clare <mclare at michaelclare.com>wrote:


> With the diff out, the two half shafts just pull out, they are not held in

> by anything.  Once they are off they can be serviced normally.

>

> -----Original Message-----

> From: mbcoupes-bounces at mbcoupes.com [mailto:mbcoupes-bounces at mbcoupes.com]

> On Behalf Of mbcoupes-request at mbcoupes.com

> Sent: Tuesday, April 12, 2011 9:15 AM

> To: mbcoupes at mbcoupes.com

> Subject: MBCOUPES Digest, Vol 83, Issue 12

>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.pairlist.net/pipermail/mbcoupes/attachments/20110412/752f0608/attachment.htm>