[W126 Coupe] Anyone help me with a blower motor?

[Josh Allen]

Well, I went and looked it up in the EPC without a VIN, and there still 
doesn't seem to be an aspirator motor that I can find, either in Heating 
or in the Air Conditioning sections, specifically.

As to the vent on my SEC, there is a sensor behind it, a short hose to a 
pipe that runs down the right A-pillar, and from what I've understood 
from other discussions, there should be a soft foam hose that connects 
that pipe to the main blower plenum which is the source of the vacuum to 
draw cabin air through the sensor.

Maybe the aspirator was for the later models?  I just haven't seen them 
mentioned on the 126 previously, though I'm by no means an authority.

-Josh

On 9/8/2010 3:21 PM, Dick Spellman wrote:

> Hi Josh,

>

> You are correct, there is no aspirator blower in the Gen 1 126.  The 

> vent is present in the front courtesy lamp holder but, that's about 

> it..  So there would be no reference in the EPC.

>

> Regards,

> Dick

>

> On Wed, Sep 8, 2010 at 5:49 PM, Josh Allen <heyallen at null-ptr.net 

> <mailto:heyallen at null-ptr.net>> wrote:

>

>     On 9/8/2010 8:51 AM, Jay Manek wrote:

>>     Hi Camran,

>>     Thats a good point, could well be the problem! Can you help me

>>     with the part number as I cant seem to locate it on the parts

>>     catalogue...

>>     Many Thanks & Regards

>>     Jay Manek

>

>     It may be due to my car being a 1st gen w126, but I'm not finding

>     an aspirator motor in the EPC.

>

>     If yours is a second generation car,  could I use your VIN to look

>     it up?

>

>     If not, does someone know where the part is hiding in the EPC?

>

>     -Josh

>


-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.pairlist.net/pipermail/mbcoupes/attachments/20100908/94b6d884/attachment.htm>