[W126 Coupe] Sparks

[Markus Meyer]

Just make sure you are not using resistor plugs with your resistor wires.  I
believe the R in the plug number means resistor, so be careful with those
(WR9DC) as opposed to W9DC.  I found the regular ones still at my dealer, so
call around, they might still be able to be found.

slightly bigger gap appears to make them run a little better, at least in my
experience.  I've been following Jono's suggestions.

Markus

On Fri, Oct 1, 2010 at 2:35 PM, Jay Hirsch <J.Hirsch at mac.com> wrote:


> Bosch W9DCO    no longer available

>

> *Bosch   #7911*   and  Bosch   #WR9DC+  the same plug   from Bosch web

> site

>

> as is this AC Delco  plug  which I use in my 1976 Eldorado and is

> interchangeable according to Bosch

> *ACDELCO Part # R45XLS*

> *recommended gap for plugs is  .032 on  web  site.    *

> *But I see MBCoupes recommend  .044  Which  gap should I use?*

> *

> *

> *

> *

> *keep cruisin*

> *Jay H*

>

>

>

> The MB Coupes Website!

> W126 SEC Mailing List

> Postings remain property of MB Coupes, L.L.C.

>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.pairlist.net/pipermail/mbcoupes/attachments/20101001/ccfded7a/attachment.htm>