[W126 Coupe] Seat switch cover removal - 560 SEC
Markus Meyer
markusfmeyer at gmail.com
Fri May 21 14:48:13 EDT 2010
If you have the buttons off, look for a round "ring" that holds the cover in
place. Carefully pry that off. Then you need to get the plastic "inset"
around the door handle where you pull on to open the door from the inside
out. Then there's a screw holding the metal plate under that on there. The
other side around the switches clips into that metal plate on the one side,
and is held in by the wood surround on the other.
Hope this helps.
Markus
On Fri, May 21, 2010 at 2:33 PM, Richard & Nancy Diefenbach <
diefenbach at kingcon.com> wrote:
> Would someone coach me in removing the driver's side cover. I got the 3
> "buttons" off and half of the cover (from the front). The rest is putting
> up a lot of resistance and I don't want to snap anything.
>
> Dick Diefenbach
> Danville, VT
>
> The MB Coupes Website!
> W126 SEC Mailing List
> Postings remain property of MB Coupes, L.L.C.
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.pairlist.net/pipermail/mbcoupes/attachments/20100521/7a73bef5/attachment.htm>
More information about the MBCOUPES
mailing list