[W126 Coupe] Heater Blower

[Camran Nassiri]

Thanks Dick; I'll give it a try.  The motor alone is about $120 and the whole motore and fan housing is at about $300.  So, we'll see if I can save some dollars, I'll let you know.

Thanks,
Camran



 

> Date: Mon, 29 Mar 2010 18:08:52 -0400

> From: dick.spellman at gmail.com

> To: mbcoupes at mbcoupes.com

> Subject: Re: [W126 Coupe] Heater Blower

> 

> Camran Nassiri wrote:

> > Hi Dick- I was able to get the heater blower out this week end. How do 

> > you take the motor appart from the fan blade and housing? 

> > 

> > Thanks,

> > Camran

> 

> Hi Camran,

> 

> Assuming my spare which I bought new a while back is the same as the 

> factory original that you have it looks like:

> 

> -you need a puller for the fan hub - pull the hub from the spindle

> -remove two short Phillips screws with lock washers at the other end

> -depress the terminal connectors inward so they will not interfere with 

> motors passage through the outer casing

> -then you need to separate the motor from the outer casing (not sure how 

> this is done)

> 

> Regards,

> Dick

> The MB Coupes Website!

> W126 SEC Mailing List

> Postings remain property of MB Coupes, L.L.C.

 		 	   		  
_________________________________________________________________
Hotmail: Free, trusted and rich email service.
http://clk.atdmt.com/GBL/go/196390708/direct/01/
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.pairlist.net/pipermail/mbcoupes/attachments/20100329/afa94c89/attachment.htm>