[W126 Coupe] Hydraulic Suspension on 560SEC

[Mike Kelly]

Ernie, the workshop manual [on CD] has very good detail on
resetting/bleeding the SLS. As they use special oil, the manual suggests the
bleed oil is saved and reused if needed.

Mike K

 

From: Mike R. [mailto:mramay at att.biz] 
Sent: Wednesday, 10 March 2010 3:36 AM
To: 'Mercedes Coupes Mailing Lists'
Subject: Re: [W126 Coupe] Hydraulic Suspension on 560SEC

 

There's a bleed screw on top of the hydraulic valve in the back of the car
(it's attached by an arm to the center of the rear sway bar).

 

Mike

 

From: mbcoupes-bounces at mbcoupes.com [mailto:mbcoupes-bounces at mbcoupes.com]
On Behalf Of Ernie Stephens
Sent: Tuesday, March 09, 2010 8:59 AM
To: Mercedes Coupes Mailing Lists
Subject: [W126 Coupe] Hydraulic Suspension on 560SEC

 

I have my 87 560SEC at an alignment shop for installation of the KMAC camber
adjusting kit that I mentioned in a previous email.  The shop has run into a
problem; they don't know how to bleed the hydraulic suspension.  Can anyone
offer some help here.

Thanks,

Ernie

Eagle, Idaho

No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.436 / Virus Database: 271.1.1/2730 - Release Date: 03/09/10
07:33:00

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.pairlist.net/pipermail/mbcoupes/attachments/20100310/f3182999/attachment.htm>