[W126 Coupe] 560 SEC Hydraulic Pump

[Markus Meyer]

Nope, pump is on the front right side of the motor.  I think 4 allen bolts
hold it on.  You will have to remove the rubber hose like Mike says on the
inlet side, then there is a connection on the outlet side as well.
Disconnect all of that, pull the unit forward and up and out.

Markus

On Thu, Jan 28, 2010 at 3:08 PM, Henry Viveiros <henryviv at oigp.net> wrote:


>  I don’t even know what the pump looks like, but I’ll just follow the hose

> from the reservoir and see where it goes. I believe it’s on the passenger

> side of the engine compartment at the rear.

>

> The MB Coupes Website!

> W126 SEC Mailing List

> Postings remain property of MB Coupes, L.L.C.

>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.pairlist.net/pipermail/mbcoupes/attachments/20100128/9734264f/attachment.html>