[W126 Coupe] Wannabe Gullwing & Who know how to fix oil leaks on de cpe

[Ernie Stephens]

Thanks Josh, appreciate your input.

Ernie
  ----- Original Message ----- 
  From: Josh Allen<mailto:heyallen at null-ptr.net> 
  To: Mercedes Coupes Mailing Lists<mailto:mbcoupes at mbcoupes.com> 
  Sent: Friday, October 30, 2009 9:40 PM
  Subject: Re: [W126 Coupe] Wannabe Gullwing & Who know how to fix oil leaks on de cpe


  Regarding the oil leaks, I did the upper oil pan while the engine was on 
  an engine stand, and found even that to be an adventure in aggravation 
  just due to having to extract all the little hex head cap-screws that 
  hold it on.

  That being said, I seem to remember someone saying that it's possible to 
  remove while the engine is in place, by doing some creative juggling and 
  lifting the engine up off of the engine mounts to allow the pan to clear 
  the cross member.

  You might also consider scrubbing the engine down with an engine cleaner 
  and see just where the leak is actually coming from.  I'd suspect the 
  front main seal to develop a leak prior to the upper oil pan 
  spontaneously doing so.  Both of my crank shaft main seals had done so 
  on my 500SEC's replacement motor.

  Best of luck in finding it, and hopefully it's something easy to remedy!

  -Josh Allen

  Ernie Stephens wrote:
  > Well, at least they haven't changed over to battery motors yet. 
  >  
  > My 87 560 SEC has either struck oil or is loosing it pretty bad.  It 
  > appears that the front pan is not so hard to R&R but the bigger pan 
  > looks like a major job . . . any suggestions from the pros?
  > Thanks,
  > Ernie

  The MB Coupes Website!
  W126 SEC Mailing List
  Postings remain property of MB Coupes, L.L.C.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.pairlist.net/pipermail/mbcoupes/attachments/20091031/cd8e87ca/attachment.htm>