[W126 Coupe] Help trouble shooting 87 560SEC hesitation at take off problem.

[alal30319 at gmail.com]

Jonathan,

I have an Inova digital timing light that has advance and retard function,
When I advance the timing on the light to 27 degrees, I see the 0 degree
mark on the pulley. I'm pretty sure that pulling the vac line off the EZL
did not change the timing and if you don't believe, I have a witness!

I'll check the fuse box for that relay thing that you're talking about. I
have a 560SEL also which I can switch parts on.

I don't think the timing light is dodgy, I've used it many times without
problems and too advance timing could well cause poor running at idle.

Thanks again and I'll get back to you.

Many thanks

Al
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.pairlist.net/pipermail/mbcoupes/attachments/20091102/f6bcaae6/attachment.htm>