[W126 Coupe] Plug leads

[Dan Gardner]

Hi Folks

    Thanks for the reply Jonathon, I was quite concerned about the one 
spring on the distributor!!

    I fitted Bosch  W 7 DC plugs as per the Bosch catalogue,I bought Bremi 
leads but on the Beru leads the distributor caps unscrewed nicely so that 
you could fit the  lead numbers plus the two black tubing sleeves,no one at 
the shop could tell me how to dismantle the Bremi's so I used the convoluted 
split tube for added protection and I have to locate some numbers or mark 
the leads with paint numbers.

    Also fitting them under the engine tubes & wires was fiddly with the 
caps on.Haven't tested the car yet to see if its cured the miss,tested the 
old leads with an OHM meter didn't seem to be overly high 30,000OHMS max.

                                                                             
               regards Dan Gardner  1986 560 SEC Euro 220kw