[W126 Coupe] Bosch Impact Gun.

[Mike R.]

How much is "full power"? 
 
My Mac Tools 1/2" impact gun is rated at 450 ft/lbs (tightening) on 90 psi
and it takes most of the gun's capabilities to remove a lug bolt. It took my
gun at 120psi to get the six allen bolts out of the axle flange on the
differential!! 
 
Thanks,
Mike R
 
From: mbcoupes-bounces at mbcoupes.com [mailto:mbcoupes-bounces at mbcoupes.com]
On Behalf Of Carl Hansen
Sent: Tuesday, August 18, 2009 10:11 AM
To: Mercedes Coupes Mailing Lists
Subject: [W126 Coupe] Bosch Impact Gun.
 
I purchased a few BOSCH air impact guns from a retailer who went out of
business. These guns are particularly great for changing alloy wheels in
that they have 3 settings for tightening, the lowest setting will just snug
up the wheel bolts without over-tightening, from there it's a cinch to
finish up with a torque wrench. In reverse the gun runs on full power.
The gun comes in a hard plastic case and besides 5 metric sockets, one
extension and an airline quick connector.
Price to M-B coupe members is half the suggested list price of 282.00
Canadian.
$141.00 Canadian or 125.00 US including freight.
I only have four left so don't delay, you don't want to miss out on this
one.
 
Carl Hansen
560SEC
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://www.pairlist.net/pipermail/mbcoupes/attachments/20090818/2cfadec8/attachment.htm>